1. Proven rocker-pin principle
2. Easy Corner adjustment by matched load cell outputs
3. Full stainless steel construction
4. Wide operating temperature range
5. High overload capacity
6. Resistant against vibration
7. Hermetically sealed, IP68 (depth of 1.5m for 10,000 hours), IP69K, (equiv. NEMA 6)
8. Ex-version available (PR 6202/..E)
9. W & M approval (acc. to OIML R60)
10. Meets EHEDG requirements
11. Registered Design Nos.
EU 000 210 349-0001/-0002
JP 2005 - 478
US 22/222, 249
旧国标将应用对象和使用环境条件*不同的“称重”和“测力”两种传感器合二为一来考虑，对试验和评价方法未给予区分。旧国标共有21项指标，均在常温下进行试验；并用非线性、滞后误差、重复性误差、蠕变、零点温度附加误差以及额定输出温度附加误差6项指标中的zui大误差，来确定称重传感器准确度等级，分别用0.02、0.03、0.05表示。
参数
Technical Data C1 C3 C4
Accuracy class 0.03 0.015 0.012 % Emax
Minimum dead load lowest limit of specified measuring range Emin 0 0 0 % Emax
Rated capacity highest limit of specified measuring range Emax s. table s. table s. table
光栅式传感器利用光栅形成的莫尔条纹把角位移转换成光电信号（图2）。光栅有两块，一为固定光栅，另一为装在表盘轴上的移动光栅。加在承重台上的被测物通过传力杠杆系统使表盘轴旋转，带动移动光栅转动，使莫尔条纹也随之移动。利用光电管、转换电路和显示仪表，即可计算出移过的莫尔条纹数量，测出光栅转动角的大小，从而确定和读出被测物质量。
Max. usable load upper limit of measurements Eu 150 150 150 % Emax
Destructive load danger of mechanical destruction Ed > 300 > 300 > 300 % Emax
Minimum LC verification minimum load cell verification interval, vmin = Emax/Y Y 5,000 14,000 16,000
for Emax = 2t 5,000 10,000 -
