Advantage
 |
5A-650(F) gantry type construction +Four linear guideways on Y axis with drive through gravity enhance stable and dependable moving rigidity. +The machines are available to be loaded into a HQ container for saving freight costs and reassembling of parts. +The machine design meets the human engineering principles that allow the operator to load and unload workpieces with ease. +As there is no obstruction between the workpiece and machining area, chips are quickly evacuated through chip removing channel. This design prevents the machine from thermal deformation caused by heat accumulated chips. |
5A-600T(F)/5A-800T(F) high speed bridge type construction +The special design of great span between Y-axis linear guideways drasticakly increases structural rigidity and resists heavy cutting load. +With the additional pin on the bearing housing, higher transmission rigidity can be achieved. +With thermal symmetry and heat isolation design, the heat thermal can be isolated to 97%. +With the use of toplogy technology to conduct an optimum structrual analysis, a light-weight structure can be achieved. |  |
i-Tech spindle(opt) +Exclusive smart functions for self-designed and manufactured high speed 24,000rpm spindle is available to integrate various smart functions such as i-Diagnosis, i-Compensation, i-Balance and i-Protections that provide safety protection of the spindle, increase the spindle accuracy and reduce down time. Static rigidity and structure analysis +Static rigidity and machine structure are analyzed by ANSYS to confirm structure design quality and safety for optimum performance. Roller type linear guideways on 3 axes +The linear contact between the rolling body of the roller and the sliding block causes a tiny elastic deformation under a high load condition. This makes high accuracy, heavy load resistance and lifespan possible. Thermal growth control on 3 axes(opt) +The parts in 3-axis feed system, such as the motor base, ballscrews, nuts and bearing are compley cooled to remove thermal deformation while ensuring the positioning accuracy of the machine(Features may vary by model, please check with sales person). Model identification +T: Twin arm(Twin arm supported rotary table) +F: Four(4+1 axis control function) +TF: Twin arm+Four
| |
Specification
5A-650 5A-65E 5A-650F 5A-65EF 5A-600T 5A-600TF 5A-800T, #40 5A-800T, #50 5A-800TF, #40 5A-800TF, #50
- Machine Model
- 5A-650
- Table
Working surface
φ650 (25.59)
mm (inch)
Max. table load
Horizontal:300 (661.39), Vertical:200 (440.92)
kg (lbs.)
- Travel
Longitudinal travel(X-axis)
660 (25.98)
mm (inch)
Cross travel(Y-axis)
550 (21.65)
mm (inch)
Vertical travel(Z-axis)
460 (18.11)
mm (inch)
- Spindle
Spindle nose taper
ISO40, HSK-A63(24K only)
Spindle speed(DDS)
10000 opt.12000/15000
rpm
Spindle speed(Built-in)
opt. 24000
rpm
- Feed
Rapid traverse rate(X/Y/Z)
36/36/36 (1417.32/1417.32/1417.32)
m/min (ipm)
- ATC
Tool storage
A:24 opt. 30/40/60
pcs
Application Example
