CZ32阀体加工自动液压车床主要加工材料是铜和铝,主要加工内外螺纹,倒角,切槽,攻丝,平端面等,此款机床主要适用于各种行业,尤其是适合加工快慢开,阀体,阀芯,水暖管件,可以根据客户产品的具体要求加装不同数目的油缸,采用液压进刀,气动夹紧,速度快,效益高。
CZ32阀体加工自动液压车床【客服服务 】:
(1)可来图分析和打样,为贵公司免费设计生产工艺流程,车间设备配套及人员配套。
(2)为客户解决如材料供应,表面的质量处理和有关技术条件等提供信息,让贵公司在设备安装调试后,就可以顺利正常生产。
(3)可给贵公司提供加工各类产品的*化加工方案,如:加工什么样的材料,使用什么品牌价值的道具。
(4)可根据贵公司所需量身定做机床。
(5)因客户加工需求不同,zui后定价根据实际情况而定。
【售前·售后服务】:
售前:来图纸分析效率、工艺、按客户要求提供打样。为客户提供完*方案。
售中:订机后,免费提供技术培训,客户派专员学习操作,使设备安装调试后,就可以顺利正常操作生产。
CZ30A阀体加工自动液压车床技术参数:
参数 | CZ30A |
diam range加工产品直径f范围 | φ5-φ30mm |
加工产品长度f范围 | 5-30mm |
主轴通孔直径 | φ38mm |
拉管通孔直径 | φ27mm |
主电机功率 | 1.5-2.2kw-6 |
主轴转速范围 | 500-2500rpm |
上料方式 | Vibrating disk automatic feeding |
加工效益 | 8-15pcs/min |
正常工作大气压 | 0.6 - 0.8Mpa |
正常工作油泵压力 | 20-40mpa |
机床变压器 | 150w |
外部电源 | 380v/3ph/50hz |
机床尺寸 | 1450*1050*1600mm |
机床净重 | 800kg |
MACHINE FUNCTION:
Hydraulic automatic lathe main process material is brass and aluminum,it can process inside and outside thread,chamfer,groove,slot,tapping, mantle fiber,flat end and turning.
Hydraulic automatic lathe used for various industries, especially the quick opening of valves, slowly open, nut, valve body, valve core in valve , plumbing and pipe fittings industry.
Hydraulic automatic lathe can designed to be single cylinder,double ylinder,three cylinder,four cylinder according to workpiece’processing steps in order to make finished products one time.if workpiece is long we can use long hopper load them and if short workpiece we can use vibration plate load them. the clamping is pneumatic system which are very fast.the Feed adopts hydraulic system and PLC control, This structure can greatly improve the benefit of processed products, reduce the production cost. Hydraulic automatic lathe adopts hydraulic drive technology and control available in a wide range of stepless speed regulation, with good directional control and speed in performance, easy to realize automatic work cycle.
MACHINE PARAMETER | |
Description | CZ30A automatic lathe |
Process workpiece diam range | φ5-φ30mm |
Process workpiece length range | 5-30mm |
Spindle hole diam | φ38mm |
Drawn pipe hole diam | φ27mm |
Motor Power | 1.5-2.2kw-6 |
Spindle Speed range | 500-2500rpm |
Feeder type | Vibrating disk automatic feeding |
Processing efficiency | 8-15pcs/min |
Working air pressure | 0.6 - 0.8Mpa |
Working oil pump pressure | 20-40mpa |
Machine controller transformer | 150w |
Power Supply Voltage | 380v/3ph/50hz |
Net diemensions | 1450*1050*1600mm |
Net weight | 800kg |