详细介绍
Technical parameters for Series J31 Straight sided one-point presses
名称Name\型号Model | J31-100H | J31-125H | JB31-160H | |
公称压力Nominal capacity | 千牛kn | 1000 | 1250 | 1600 |
公称力行程Nominal pressure stroke | 毫米mm | 7 | 7 | 7 |
滑块行程次数Strokes per minute | 次/分s.p.m | 35 | 35 | 32 |
滑块行程Stroke of slide | 毫米mm | 165 | 165 | 165 |
zui大封闭高度Max.shut height | 毫米mm | 400 | 410 | 365 |
封闭高度调节量Shut height adjustment | 毫米mm | 100 | 100 | 110 |
滑块中心至机身距离Distance between Center of slide and frame | 毫米mm | 330 | 320 | 370 |
工作台尺寸(前后×左右)Bolster sizes (FBXLR) | 毫米mm | 655×625 | 655×625 | 790×700 |
工作台孔尺寸(φ×前后×左右)Hole dimensions in bed | 毫米mm | φ250 | φ280 | φ400 |
滑块底面尺寸(前后×左右)Bottom size of slide(FBXLR) | 毫米mm | 366×400 | 366×400 | 550×510 |
模柄孔尺寸(直径×深度)Size of the handle hole (Diameter×Depth) | 毫米mm | φ70×100 | φ70×100 | φ70×100 |
立拄间的距离Distance between columns | 毫米mm | 650 | 650 | 750 |
工作台板厚度Thickness of bolster plate | 毫米mm | 100 | 110 | 120 |
外形尺寸(前后×左右×高度)Overall Dimensions(FB×LR×Height) | 毫米mm | 1950×1800×3000 | 1950×1800×3000 | 2000×2050×3800 |
主电动机Main motor power | 千瓦 | 7.5 | 7.5 | 11 |
机床净重/毛重Tota net weight/gross weight | 千克kg | 5300 | 6300 | 15000 |
基础螺杆尺寸(长×宽×深)Base screw dimensions(Length×Width×Depth) | 毫米mm | 1500×1200×800 | 1500×1200×800 | 1600×1250×950 |