立式双刀架单轴半自动多刀车床 返回列表页

机床具采用变频电机变速的变速箱和两套独立驱动的液压刀架系统.可实现纵横向运动.

立式双刀架单轴半自动多刀车床机床采用PLC控制,液压驱动.

1.卡盘直径及工件大加工直径:                φ500mm

2.工件的大旋径:                                        φ570mm

3.工件的大长度:                                        200mm

4.自动变速种数:                                            4

5.转数：                                                        无极调速度

6.刀架:                                                           左右各一

7.主轴端面至刀架前端面                        小:297-597mm

                                                                   大:597-797mm

8.走刀量:                          纵向   无极          横向   无极

9.大行程:                        横向 :200mm       纵向:200mm

10.纵向快移速度:                               5m/min

11.横向快移速度:                               5m/min

12.主电机:                          型号:  YVP160L-4、 1500rp功率:  15KW  2--200HZ（左出线）

13.冷却泵电机:                    型号:  AOB50   功率:  90W  

14.机床外形尺寸(长x宽x高):             1425x1300x2026(mm)
            15.机床净重:          T