手机版
首页 技术动态 机床改造 分析标准 应用案例 机床资料 操作维修 科技动态 机床百科 资料文章

Ring wave generator (from site:sz3ctest)

技术动态 2010年10月02日 23:31:18 来源:苏州泰思特电子科技有限公司 971
As the power supply and control switch (or triggered by lightning) generated by transient phenomena, in the power lines, control lines and signal line generated ring-wave interference, and to this end in the domestic, commercial and industrial electrical and electronic equipment, anti - Scrambling degrees to establish a common performance evaluation criteria. SGZ-6012G Smart ringing wave simulator to meet GB/T17626.12 IEC61000-4-12 (2006 version) and ANSI C62.41 / 45 of the latest demand.
● Large LCD screen display, built-in computer control, human-computer dialogue, simple operation
● the main switch using the import of electronic switches, to ensure that the waveform stability, and comparability of strong, long life
● program-controlled high voltage power supply, voltage stability and high accuracy, voltage current monitoring
● positive or negative automatic switch test can be alternay positive and negative polarity switch
● trial software control without human operation
● surge into the phase angle of 0-360 ° is free to set up
● can establish a connection Oscillograph communications, direct observation of waveform (optional)
● computer communication interface, can be implemented remote control
Main technical parameters

Specification:

Open circuit voltage oscillation frequency(1/T)

100KHz±10%

Open-circuit output voltage  (PK1)

(250V~6000V)±10%

The forefront of the open circuit voltage waveform(T1) (10%~90%)

PK1(0.5μs±30%)

Open-circuit voltage decay rate:

40%<(PK2)/(PK1) < 110%

40%<(PK3)/(PK2)<80%

40%<(PK4)/(PK3)<80%

Short-circuit current wave of cutting-edge (T2) (10% ~ 90%)

P1≤0.9μs

Open circuit voltage (PK1) 6000V when the short-circuit current (P1)

12Ω时500A ±10%

30Ω时200A±10%

200Ω 30A±10%(Matching)

Adjacent pulse interval

1s~99s

Pulse frequency

1~9999 times

Output mode

Automatic switching or alternating positive and negative polarity

Output impedance

12Ω,30Ω

Phase into the way

Asynchronous or synchronous  (0º~360º)±10º

Sample coupling / decoupling network

Automatic matching lightning network

SGN-5010G(Single-phase 16A)

SGN-20G(Three-phase five-wire 16A)

SIZES(D×W×H)mm

560×475×245

交流咨询:   在线:
 欢迎交流电磁兼容EMC&高压测试(冲击电压、冲击电流)
进入:了解更多其他配置方案及知识
电磁兼容配置方案
一、电磁兼容知识大汇总
二、静电放电抗干扰试验系统【IEC61000-4-2
三、射频磁场辐射抗绕度试验【IEC61000-4-3
四、电快速瞬变脉冲群的抗干扰度试验【IEC61000-4-4
五、雷击浪涌抗干扰度试验【IEC61000-4-5
六、射频传导抗扰度试验【IEC61000-4-6
七、工频磁场抗扰度试验【IEC61000-4-8
八、脉冲磁场抗扰度试验【IEC61000-4-9
九、电压跌落、短时中断和渐变抗扰度试验【IEC61000-4-11
十、谐波电流、电压波动和闪烁系统【IEC61000-3-2,IEC61000-3-3
十一、衰减震荡&振铃波抗扰度试验【IEC61000-4-12
十二、汽车电子沿电源线电瞬态传导抗扰度试验【ISO7637-2,GB/T21437
十三、电磁兼容屏蔽室建设方案【EN50147-1, GB12190
十四、传导发射测试系统【CISPR22
十五、辐射发射测试系统【CISPR22
十六、喀呖声干扰测试系统【CISPR22

 

版权与免责声明
  • 凡本网注明“来源:机床商务网”的所有作品,均为浙江兴旺宝明通网络有限公司-机床商务网合法拥有版权或有权使用的作品。刊用本网站稿件,需经书面授权。未经本网授权不得转载、摘编或利用其它方式使用上述作品。已经本网授权使用作品的,应在授权范围内使用,并注明“来源:机床商务网”。违反上述声明者,本网将追究其相关法律责任。
  • 本网转载并注明自其它来源(非机床商务网)的作品,目的在于传递更多信息,并不代表本网赞同其观点或对其真实性负责,不承担此类作品侵权行为的直接责任及连带责任。其他媒体、网站或个人从本网转载时,必须保留本网注明的作品第一来源,并自负版权等法律责任。
  • 如涉及作品内容、版权等问题,请在作品发表之日起30日内与本网联系,并提供真实、有效的书面证明。我们将在核实后做出妥善处理。

服务咨询:0571-87209768

展会合作:0571-87381969

新闻编辑:0571-87381969

  • 抖音号
  • 视频号
  • 公众号
  • 小程序
Copyright jc35.com    All Rights Reserved   法律顾问:浙江天册律师事务所 贾熙明律师   机床商务网-机床行业“互联网+”服务平台
9683