手机版
首页 技术动态 机床改造 分析标准 应用案例 机床资料 操作维修 科技动态 机床百科 资料文章

Surge generator(from site:sz3ctest)

技术动态 2010年10月02日 23:17:37 来源:苏州泰思特电子科技有限公司 767
HOST
Automatic lightning surge generator SG-5006G (desktop) equipment used to assess the power cord and stood in line to connect the internal switch to switch from the natural world and lightning caused by the high-energy transient interference performance to provide a common basis. Performance fully meet the IEC61000-4-5 and GB/T17626.5 standards.

According to
IEC: 61000-4-5.
Model Number: SG-5006G


Technical characteristics:
● large-screen LCD display, built-in computer control, human-computer dialogue, easy to operate
● program-controlled high-voltage power supply, voltage stability, high accuracy current and voltage breakdown shows
● main switch of imports of electronic switch used to ensure the stability of the wave, comparable strong, long life● positive or negative automatic switch, the test may turn positive and negative polarity switch
● surge interfere with the control software on a trial basis, people need to operate
● surge into the phase angle 0-360 ° set free
● built-in IEC61000-4-5 standard four-Test level
● built-in current and voltage probes can be connected directly to oscilloscope waveform observation (optional)● RS-232 communication interface, remote control, monitoring and control system software can match.

Output voltage
0.25~6kV±5%
Output polarity
positive or negative, positive and negative turn of the
Output voltage wave
1.2/50us ± 30%
Output current wave
8/20us ± 30%
output impedance
Output short-circuit current
0.125~3kA
Surge into the phase
0 ~ 360 ° set free
Manner triggers
synchronous / asynchronous set free
 
IEC standard built-in level four standard test rating
Coupling inligent decoupling network (matching)
SGN-20G (automatic superposition of three-phase five-line, 20A) SGN-5010G (automatic superposition of single-phase, 10A)
power
AC220V ± 10%, 50/60Hz
Size (mm)
460*520*310

 
NETWORK

Smart lightning surge coupling / decoupling network of SGN-5010G single-phase network and SGN-20G is a three-phase network. Is devoted to automatic lightning surge generator SG-5006G (desktop) portfolio. Network performance in line with the IEC61000-4-5 and GB/T17626.5 standards.

According to

IEC61000-4-5.
Model Number: SGN-5010G SGN-20G
Coupling method: capacitor coupling
Coupling capacitor: 9μF(common mode test)18μF(normal mode test)
Decoupling inductor: 1.5mH
Specifications 
Item
SGN-5010G
SGN-20G
Surge waveform
1.2/50μs voltage waveform, 8/20μs current waveform
Max. input voltage
6.6kV
Max. input current
3.3kA
Coupling mode choice
     Auto  operation
Power capacity of EUT
Single phase, 3 wire, 220V, 10A
380V,20A
Three phase, 5 wire, 380V, 20A
Power
AC 220V  50/60Hz
Operating temp.
15℃-35℃
Weight
28kg
38kg
  Dimensions(D×W×H)mm
460*520*240
460*520*310
交流咨询:   在线:
 欢迎交流电磁兼容EMC&高压测试(冲击电压、冲击电流)
进入:了解更多其他配置方案及知识
电磁兼容配置方案
一、电磁兼容知识大汇总
二、静电放电抗干扰试验系统【IEC61000-4-2
三、射频磁场辐射抗绕度试验【IEC61000-4-3
四、电快速瞬变脉冲群的抗干扰度试验【IEC61000-4-4
五、雷击浪涌抗干扰度试验【IEC61000-4-5
六、射频传导抗扰度试验【IEC61000-4-6
七、工频磁场抗扰度试验【IEC61000-4-8
八、脉冲磁场抗扰度试验【IEC61000-4-9
九、电压跌落、短时中断和渐变抗扰度试验【IEC61000-4-11
十、谐波电流、电压波动和闪烁系统【IEC61000-3-2,IEC61000-3-3
十一、衰减震荡&振铃波抗扰度试验【IEC61000-4-12
十二、汽车电子沿电源线电瞬态传导抗扰度试验【ISO7637-2,GB/T21437
十三、电磁兼容屏蔽室建设方案【EN50147-1, GB12190
十四、传导发射测试系统【CISPR22
十五、辐射发射测试系统【CISPR22
十六、喀呖声干扰测试系统【CISPR22

 

版权与免责声明
  • 凡本网注明“来源:机床商务网”的所有作品,均为浙江兴旺宝明通网络有限公司-机床商务网合法拥有版权或有权使用的作品。刊用本网站稿件,需经书面授权。未经本网授权不得转载、摘编或利用其它方式使用上述作品。已经本网授权使用作品的,应在授权范围内使用,并注明“来源:机床商务网”。违反上述声明者,本网将追究其相关法律责任。
  • 本网转载并注明自其它来源(非机床商务网)的作品,目的在于传递更多信息,并不代表本网赞同其观点或对其真实性负责,不承担此类作品侵权行为的直接责任及连带责任。其他媒体、网站或个人从本网转载时,必须保留本网注明的作品第一来源,并自负版权等法律责任。
  • 如涉及作品内容、版权等问题,请在作品发表之日起30日内与本网联系,并提供真实、有效的书面证明。我们将在核实后做出妥善处理。

服务咨询:0571-87209768

展会合作:0571-87381969

新闻编辑:0571-87381969

  • 抖音号
  • 视频号
  • 公众号
  • 小程序
Copyright jc35.com    All Rights Reserved   法律顾问:浙江天册律师事务所 贾熙明律师   机床商务网-机床行业“互联网+”服务平台
9683