机床商务网
详细介绍
数控穿孔机系列
CNC Drilling EDM Series
Precision servo motors on X,Y,Z axes provide excellent stability during drilling.
Provide linear slideway and ballscrew ensure very accurate movements.
NC program G-code and DXF files could be directly read; Automatically finds the start cutting point and begins a fine hole drilling process.
Drilling capacity from 0.3 mm to 3.0 mm diameter brass or copper electrode tubes.
Z axis auto reset and depth calculation.
The flushing medium used by this machine is distilled water - environment friendly.
Data could be input by USB, or transfer through RS232 transmission and network.
Direct and easy learning dialogue operation interface.
XYZ轴采用精密伺服电机，在打孔过程中提供了优异的稳定性。
配备直线导轨和滚柱丝杆以保证机械运动的准确性。
可以直接读取NC程序、G代码和DXF文件。能够自动寻找初始孔点并开始钻孔。
钻孔直径为0.2-3.0mm，使用黄铜或铜管电极。
Z轴自动复位和深度计算。
工作液为自来水，环保无污染。
可通过USB，RS232和网络输入数据。
简洁易学的的对话操作界面。
CNC Drilling EDM Series
| Parameters/参数 | Unit/单位 | Model/型号 | ||
| WH703-1 | WH703-2 | WH703-2 | ||
| Travel X×Y×Z X、Y、Z行程 | mm | 300 x 200 x 280 | 400 x 300 x 280 | 500 x400 x 280 |
| Worktable dimension 工作台尺寸 | mm | 400×300 | 500×400 | 600×500 |
| Max. workpiece weight zui大工件重量 | kg | 300 | ||
| Max. drilling depth zui大加工深度 | mm | 300 | ||
| W-axis travel 主轴头辅助行程 | mm | 200 | ||
| Z-axis travel 主轴伺服行程 | mm | 280 | ||
| Pump operating pressure 工作液zui大压力 | Mpa | 7.0 | ||
| Max. drillingspeed zui大穿孔速度 | mm/min | 10-60 | ||
| Electrode diameter 电极直径 | mm | Φ0.3-Φ3.0 （0.3,, 0.50 optional） | ||
| Dielectric unit capacity 水箱容积 | Liters | 20×2 | ||
| Work tank 工作液槽 | mm | 650×490 | 750×590 | 850×690 |
| Machine dimensions （W×D×H） 主机尺寸 （长×宽×高） | mm | 850×755×1850 | 960×805×1850 | 1060×925×1850 |
| Machine floor area 机床占地面积 | mm | 1150×1150 | 1150×1150 | 1250×1250 |
| Total weight 机床重量 | kg | 550 | 650 | 800 |
| Electrical supply 动力源 | ||||
| Standard power supply 标准电源 | - | 380V±10%/50Hz/4KVA | ||
| Other supply 其它电压 | - | 200V-480V（on request） | ||
| Room condition 环境条件 | - | 15-30℃/40-80% | ||
| Generator & Control 控制系统 | ||||
| Max. machining current zui大加工電流 | 30A | |||
| Technologies 加工材料 | steel/copper/aluminum/carbide | |||
| Dielectric 工作液 | Water 自来水 | |||
| Monitor 显示屏幕 | LCD | |||
| NC axes 控制轴 | X/Y/Z | |||
| Coordinate mode 坐标模式 | Incremental | |||
| Dimension （option） 尺寸单位 | Metric & Inch 公制-英制 | |||
| Min. command zui小设定尺寸 | mm | 0.001 | ||
| Max. command zui大设定尺寸 | mm | ±999.999 | ||
﹡The content of this catalogue is subject to be changed by the factory.
机床商务网