详细介绍
The machine tool is applied to processing deep small holes on all kinds of electricity conduction materials such as stainless steel, quenching steel, hard alloy, bronze, aluminium and so on, the holes such as electric spark thread cutting workpieces’ hole, chemist fibre hole ,filer board, sieve board holes current hole and so on .Process hole which its diameter is 0.1-4.0mm, the max depth diameter ratio is 300:1 and more pass through directly from inclined plane or camber.
The machine tool can also used in corrosion shooting.
本 系列机床主要用于加工不锈钢、淬火钢、硬质合金、铜、铝等导电材料工件上的深小孔。如电火花线切割工件的穿丝孔、化纤喷丝头、喷丝板的喷丝孔、滤板、筛板 的群孔、发动机叶片、缸体的散热孔、液压、气动阀体的油路、气路孔、静*承节流孔等。可直接对工件的斜面、曲面进行加工。加工孔径在0.1~5.0mm之间,zui大深径比可达300:1以上,zui大加工速度10~60mm/min(电极和加工材料)。
本系列机床也可用蚀除折断在工件中的钻头、丝锥,而不会损坏原孔或螺纹。
ZNC Drilling EDM Series
Parameters/参数 | Unit/单位 | Model/型号 | ||||
DK703F-1 | DK703F-2 | DK703F-3 | ||||
Travel X×Y×Z X、Y、Z行程 | mm | 350 x 250 x 250 | 370 x 270 x 280 | 370 x 270 x 280 | ||
Worktable dimension 工作台尺寸 | mm | 450×250 | 400×300 | 400×300 | ||
Electrode diameter 电极直径 | mm | Φ0.1-Φ3.0 | Φ0.2-Φ3.0 | Φ0.3-Φ3.0 | ||
Max. workpiece weight zui大工件重量 | kg | 300 | ||||
Max. drilling depth zui大加工深度 | mm | 300 | ||||
W-axis travel 主轴头辅助行程 | mm | 200 | ||||
Z-axis travel 主轴伺服行程 | mm | 280 | ||||
Pump operating pressure 工作液zui大压力 | Mpa | 7.0 | ||||
Max. drilling speed zui大穿孔速度 | mm/min | 10-60 | ||||
Dielectric unit capacity 水箱容积 | Liters | 20×2 | ||||
-Work tank 工作液槽 | mm | 650×490 | 700×550 | 700×550 | ||
Machine dimensions (W×D×H) 主机尺寸 (长×宽×高) | mm | 1150×1050×2300 | 960×805×1850 | 960×805×1850 | ||
Machine floor area 机床占地面积 | mm | 1250×1150 | 1150×1150 | 1150×1150 | ||
Total weight 机床重量 | kg | 850 | 650 | 650 | ||
Electrical supply动力源 | ||||||
Standard power supply 标准电源 | - | 380V±10%/50Hz/4KVA | ||||
Other supply 其它电压 | - | 200V-480V(on request) | ||||
Room condition 环境条件 | - | 15-30℃/40-80% | ||||
Generator & Control控制系统 | ||||||
Max. machining current zui大加工電流 | - | 30A | ||||
Technologies 加工材料 | - | steel/copper/aluminum/carbide | ||||
Dielectric 工作液 | - | Water 自来水 | ||||
Monitor 显示屏幕 | - | LCD | ||||
NC axes 控制轴 | - | Z | ||||
Coordinate mode 坐标模式 | - | Incremental | ||||
Dimension (option) 尺寸单位 | - | Metric & Inch 公制-英制 | ||||
Min. command zui小设定尺寸 | mm | 0.005 | ||||
Max. command zui大设定尺寸 | mm | ±999.995 | ||||
﹡The content of this catalogue is subject to be changed by the factory.
线切割 线切割机 线切割机床 中走丝线切割 中走丝线切割机床 中走丝 电火花机 http://www.topwedm.com
线切割 线切割机 线切割机床 穿孔机 中走丝 中走丝线切割 电火花机 电火花线切割 电火花穿孔机 http://www.wirecut-edm.com/