详细介绍 产品详细介绍 机床特点/Features: ◆整体床座 机床规格与主参数Specification 技术参数 Specification Models CM6241×1000/1500 CM6241V×1000/1500 加工范围 Capacity 床身上工件回转直径 Swing over bed 410mm(16") 拖板上工件回转直径 Swing over cross slide 255mm(10") 马鞍槽内回转直径 Swing in gap diameter 580mm(23") 花盘前马鞍有效长度 Length of gap 190mm(7-1/2") 两中心距 Admits between 1000mm(40")/1500mm(60″) 主轴中心高 Center height 205(8″) 床身宽度 Width of bed 250(10") 主轴 HEADSTOCK 主轴端部 Spindle nose D1-6 主轴通孔直径 Spindle bore 52mm(2") 主轴内孔锥度 Taper of spindle bore No.6Morse 主轴转速范围 Range of spindle speed 16 changes 45-1800r/min 30-550r/min or 550-3000r/min 进给及螺纹 FEEDS AND THREADS 小拖板纵向行程 Compound rest travel 140mm(5-1/2") 中拖板横向行程 Cross slide travel 210mm(8-1/4") 大丝杆规格 Lead screw thread 4T.P.I. 车刀刀杆尺寸(宽×高) Max.Section of tool (W×H) 20×20mm(13/16") 纵向进给范围 Longitudinal feeds range 0.05-1.7mm/rev(0.002"-0.067"/rev) 横向进给范围 Cross feeds range 0.025-0.85mm(0.001"-0.0335"/rev) 公制螺纹范围 Threads metric pitches 39kinds 0.2-14mm 英制螺纹范围 Threads imperial pitches 45kinds 2-72T.P.I 径节制螺纹规格 Threads diametral pitches 21kinds 8-44D.P. 模数制螺纹规格 Threads module pitches 18kinds 0.3-3.5M.P. 尾座 TAILSTOCK 尾座套筒直径 Quill diameter 50mm(2") 尾座套筒行程 Quill travel 120mm(4-3/4") 尾座套筒内孔锥度 Quill taper No.4 Morse 横向调整 Cross adjustment ±13mm(±1/2") 电机 MOTOR 主电机功率 Main motor power 2.2/3.3kW(3/4.5HP)3PH