机床商务网
详细介绍
采工件端面夹持，防止工件夹持变形，适合薄壁工件加工。
夹持补偿机构，可夹持不规则断面之工件。
夹头中心可装设工件密著确认装置。
Prevent deformation of workpiece for gripping the terminal surface,suitable for thin workpiece process.
The compensating mechanism of gripping that can grasp the workpieces of the irregular surface.
Additional check device able to install in the center of chuck.
尺寸单位/Size unit: mm
| 规格 Spec 型号 Model | 楔心行程 Plunger stroke mm | 爪行程直径 Jaw stroke Dia. mm | 夹持直径 Max chucking Dia. mm | 最小夹持直径 Min chucking Dia. mm | 容许油压缸推力 Max.D.B.Pull KN(kgf) |
|---|---|---|---|---|---|
| 3J-05 | 12 | 8 | 53 | 25 | 7.5(765) |
| 3J-06 | 12 | 8 | 79 | 55 | 9.0(918) |
| 3J-08 | 12 | 8 | 106 | 75 | 18.0(1835) |
| 3J-10 | 12 | 8 | 150 | 119 | 18.0(1835) |
| 3J-12 | 12 | 8 | 200 | 169 | 18.0(1835) |
| 规格 Spec 型号 Model | 夹持力 Max clamping force KN(kgf) | 转速 Max RPM | 惯性矩 I kg*m2 | 重量 Weight kg | 适合油压缸 Matched cylinders | 使用压力 Max Pressure Mpa(kgf) |
|---|---|---|---|---|---|---|
| 3J-05 | 6.0(612) | 4000 | 0.02 | 11 | S-100R/SNK-100 | 1.0(10) |
| 3J-06 | 7.5(765) | 4000 | 0.04 | 12 | S-100R/SNK-100 | 1.2(12) |
| 3J-08 | 16.5(1680) | 3500 | 0.13 | 23 | S-100R/SNK-100 | 2.5(25) |
| 3J-10 | 16.5(1680) | 3500 | 0.3 | 33 | S-100R/SNK-100 | 2.5(25) |
| 3J-12 | 16.5(1680) | 3000 | 0.56 | 44 | S-100R/SNK-100 | 2.5(25) |
| 规格 Spec 型号 Model | A | B | C | D | F | G Max | G Min | J | J1 | K |
|---|---|---|---|---|---|---|---|---|---|---|
| 3J-05 | 135 | 86 | 110 | 82.6 | 40 | 75 | 55 | 25 | 10 | M12×1.75 |
| 3J-06 | 165 | 86 | 140 | 104.8 | 45 | 75 | 55 | 28 | 14 | M16×2 |
| 3J-08 | 210 | 90 | 170 | 133.4 | 56 | 80 | 60 | 38 | 16 | M20×2.5 |
| 3J-10 | 254 | 95 | 220 | 171.4 | 56 | 75 | 55 | 38 | 16 | M20×2.5 |
| 3J-12 | 304 | 95 | 220 | 171.4 | 56 | 75 | 55 | 38 | 16 | M20×2.5 |
| 规格 Spec 型号 Model | L | L1 | M Max | M Min | N | P | Q | R | S | T | U |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 3J-05 | M10 | 15 | 56 | 36 | 20 | M10 | 42.5 | 27 | 3-M6 | 50 | - |
| 3J-06 | M10 | 15 | 56 | 36 | 20 | M10 | 57.5 | 40 | 3-M8 | 64 | 20° |
| 3J-08 | M12 | 18 | 71 | 51 | 25 | M12 | 77.5 | 53.5 | 6-M8 | 104 | 20° |
| 3J-10 | M16 | 24 | 71 | 51 | 25 | M12 | 99.5 | 75.5 | 6-M8 | 140 | 20° |
| 3J-12 | M16 | 24 | 71 | 51 | 25 | M12 | 124.5 | 100.5 | 6-M8 | 190 | 20° |
机床商务网