机床商务网
详细介绍
前推式弹性筒夹夹头，适合CNC车床，专用机，或其他旋削机械。
高精度，高转数及高刚性结构。
安装连接方式与中空夹头一样，且可与之相容互换，不必更改拉杆。
全面防水设计，防止切削水进入主轴通孔处。
It‵s a PUSH type collet are used mainly on turning ,CNC,special purpose machines and other,etc.
High clamping accuracy,high speed and construction of high rigidty.
The installation is the same as" Thru-hole power chuck"ａnd they are replaceable with each other,No need to change the "Draw tube".
Sealed against swarf,chips and coolant.
搭配弹性筒夹须符合DIN6343规范。
The collet used must accord with DIN 6343
尺寸单位/Size unit: mm
| 规格 Spec 型号 Model | 套筒行程 Plunger stroke mm | 夹持圆棒 Grip Round | 夹持六角料 Grip Hex. | 夹持方料 Grip Sq. | 容许油压缸推力 Max.D.B.Pull kgf | 夹持力 Max clamping force kgf |
|---|---|---|---|---|---|---|
| LL-26 | 4.5 | 3~26 | 4~22 | 4~18 | 17.6(1800) | 37.9(3870) |
| LL-30 | 4.5 | 3~30 | 4~26 | 4~20 | 19.6(2000) | 42.1(4300) |
| LL-36 | 6 | 3~36 | 6~32 | 6~26 | 22.5(2300) | 48.5(4950) |
| LL-42 | 6 | 3~42 | 6~36 | 6~29 | 24.5(2500) | 52.9(5400) |
| LL-52 | 6 | 5~52 | 8~45 | 7~36 | 27.4(2800) | 59.0(6020) |
| LL-6017 | 6 | 5~60 | 8~52 | 7~42 | 29.4(3000) | 63.7(6500) |
| LL-6022 | 6 | 5~60 | 8~52 | 7~42 | 29.4(3000) | 63.7(6500) |
| LL-80 | 6 | 20~80 | 18~69 | 15~56 | 34.3(3500) | 71.5(7300) |
| 规格 Spec 型号 Model | 转速 Max RPM | 惯性矩 I kg*m2 | 重量 Weight kg | 适用筒夹 Matched Collet | 适用油压缸 Matched cylinders | 使用压力 Max Pressure Mpa(kgf/cm2) |
|---|---|---|---|---|---|---|
| LL-26 | 8000 | 0.04 | 4.3 | 161E | H-0928 | 2.6(26) |
| LL-30 | 8000 | 0.038 | 4.2 | 163E | H-1036 | 2.9(29) |
| LL-36 | 6000 | 0.062 | 7 | 171E | H-1246 | 2.5(25) |
| LL-42 | 6000 | 0.06 | 6.9 | 173E | H-1246 | 2.9(29) |
| LL-52 | 6000 | 0.101 | 14.3 | 177E | H-1552 | 2.3(23) |
| LL-6017 | 5000 | 0.098 | 14.1 | 185E | H-1875 | 1.8(18) |
| LL-6022 | 5000 | 0.126 | 16.3 | 185E | H-1875 | 1.8(18) |
| LL-80 | 4000 | 0.108 | 17.8 | 193E | H-2091 | 1.6(16) |
| 规格 Spec 型号 Model | A | A1 | B | C(H6) | D | E | E1 | F max | F min | G max | G min | H | J | Kmax | L | L1 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| LL-26 | 120 | 85 | 100 | 110 | 82.6 | 4 | 23 | 26 | 3 | 7 | 2.5 | 15 | 12 | M40×1.5 | 3~M10×25 | 16 |
| LL-30 | 120 | 85 | 100 | 110 | 82.6 | 4 | 23 | 30 | 3 | 7 | 2.5 | 15 | 12 | M40×1.5 | 3~M10×25 | 16 |
| LL-36 | 155 | 100 | 120 | 140 | 104.8 | 5 | 23 | 36 | 3 | 7 | 1 | 17.5 | 20 | M55×2 | 3~M10×25 | 18 |
| LL-42 | 155 | 100 | 120 | 140 | 104.8 | 5 | 23 | 42 | 3 | 7 | 1 | 17.5 | 20 | M55×2 | 3~M10×25 | 18 |
| LL-52 | 185 | 130 | 145.5 | 170 | 133.4 | 5 | 27 | 52 | 5 | 9 | 3 | 24 | 45 | M60×2 | 6~M12×30 | 20 |
| LL-6017 | 185 | 130 | 145.5 | 170 | 133.4 | 5 | 27 | 60 | 5 | 9 | 3 | 24 | 45 | M75×2 | 6~M12×30 | 20 |
| LL-6022 | 234 | 156 | 142 | 220 | 171.5 | 5 | 32 | 60 | 5 | 13 | 7 | 24 | 45 | M85×2 | 6~M16×30 | 20 |
| LL-80 | 234 | 156 | 163 | 220 | 171.5 | 5 | 32 | 80 | 20 | 15.5 | 9.5 | 24 | 45 | M100×2 | 6~M16×30 | 20 |
机床商务网