机床商务网
详细介绍
| Capacity | |
|---|---|
| Swing over bed | 1150 mm |
| Swing over cross slide | 700 mm |
| Distance between centers | 1200, 2200, 3200, 4200, 5200, 6200, 7200 mm |
| Width of bed | 725 mm |
| Stroke | |
| X - axis | 560 mm |
| Z - axis | 1100, 2100, 3100, 4100, 5100, 6100, 7100 mm |
| Spindle | |
| Spindle bore | φ 181 mm ( A2 - 15, 6 ~ 650 rpm ) φ 255 mm ( A2 - 15, 6 ~ 650 rpm ) φ 375 mm ( A2 - 20, 4 ~ 500 rpm ) φ 530 mm ( A2 - 28, 2 ~ 300 rpm ) |
| Number of spindle speed range | 2 |
| Turret | |
| OD tool shank | V8 : □ 32 mm H 4 , H 6 ( Option ) |
| ID tool shank ( Max. ) | V8 : φ 60 mm H 4 , H 6 ( Option ) |
| Feed traverse | |
| X - axis | 6 m / min |
| Z - axis | 6 m / min |
| Tailstock | |
| Tailstock stroke | 180 mm |
| Quill diameter | 240 mm |
| Quill tpaer | MT # 6 |
| Motor | |
| Main motor (30 min.) | α 40 i ( 60 HP / 50 HP ) |
| Servo motor | X : α 22 i ( 5.3 HP ) Z : α 40 i ( 8 HP ) |
| Hydraulic unit motor | 2 HP |
| Coolant pump motor | 1 HP |
| Machine dimension | |
| Length of machine | 5820, 6820, 7820, 8820, 9820, 10820, 11820 mm |
| Width of machine | 3023 mm |
| Height of machine | 2254 mm |
| Weight of machine | 11800, 13260, 15110, 16980, 18850, 20730, 24000 kg |
- Specifications are subject to change without notice.Swing can be raised according your requirement.Distance between center and Z axis travel will be changed because of different spindle bore.X axis travel will be changed because of different tool post.Machine length is not including chip conveyor.Detail specification depends on quotation.Standard or optional depends on quotation.
Standard equipment & accessories
- Controller FANUC 0iTDColor LCD 10.4"Spindle motor 60 HP, α 40 iSpindle bore 181, 255, 375 or 530 mmSpindle mechanical orientationCs axis function3 - jaw hollow hydraulic chuck3 - jaw manual scroll chuck4 - jaw manual independent chuckPneumatic power chuckVertical 8 - station turret, tool holders & socketsHorizontal 4 - station turret without tool holder & socketsHorizontal 6 - station turret without tool holder & socketsV12 Driven tool system without tool holder & socketsBoring attachment without boring barCL 68 : There are four different clamping ranges for Steady restswith roller jaw. They are φ 40 ~ 220 mm, φ 210 ~ 390 mm,φ 350 ~ 520 mm and φ 520 ~ 700 mmCL78: There are two different clamping ranges for Steady restwith roller jaw. They are φ 450 ~ 655 mm and φ 650 ~ 800 mm.CL 78 : Supporter with roller and pad, clamping rangeφ 600 ~ 850 mm & φ 800 ~ 1070 mmSelf - center follow restTailstock with built - in - center & Dead center MT # 6Hydraulic systemCoolant pan & Coolant systemChip conveyorDouble door & Splash guardWork lightTool box with adjusting toolTransformer
Optional equipment & accessories
- Transformer
Boring attachment without boring bar for CL - 78
Steady rest for CL - 78
Tailstock with built - in center
Side drilling & milling attachment for CL-78
Steady rest for CL - 68
Rear chuck
Self - center follow rest for CL - 68
V8 turret for CL-68
H4 turret for CL-78
机床商务网