机床商务网
详细介绍
- Specifications
- Specifications Chart
- Accessories
- Feature
| MODEL | CNE-20 | CNE-26 | ||
|---|---|---|---|---|
| Capacity | No. of control axis | 2 Axis | ||
| Swing over bed | Ø630mm (24.8") | |||
| Standard turning diameter | H10....Ø230mm (9.05") / H12....Ø300mm (11.81") | |||
| Maximum turning diameter | H10....Ø300mm (11.81") / H12....Ø340mm (13.38") | |||
| Work length | 600mm (23.62") | 580mm (22.83") | ||
| Headstock and Main Spindle | Spindle nose, internal taper | A2-6, Ø69 Taper 1/20 | A2-6, Ø81 Taper 1/20 | |
| Spindle bore | Ø65mm (2.56") | Ø78mm (3.07") | ||
| Bar capacity | Ø52mm (2.04") | Ø65mm (2.56") | ||
| Hydraulic power chuck | Ø210mm (8") | Ø254mm (10") | ||
| Range of spindle speed | 45-4500 R.P.M. | 35-3500 R.P.M. | ||
| Front bearing ID. of spindle | Ø100mm (3.937") | Ø120mm (4.724") | ||
| Cross Slide (X-axis) and Carriage (Z-axis) | Cross slide travel (X-axis) | H10....Ø190mm (7.48") / H12....Ø207mm (8.15") | ||
| Longitudinal travel (Z-axis) | 610mm (24") | 590mm (23.23") | ||
| AC servo motor ( X-axis ) | 1.6kW 8N.m ~ FANUC α8/3000i | |||
| AC servo motor ( Z-axis ) | 3.0kW 12N.m ~ FANUC α12/3000i | |||
| Dia. of ball screw ( X-axis) | Ø32mm (1.26") P5 C3 | |||
| Dia. of ball screw ( Z-axis ) | Ø40mm (1.57") P10 C3 | |||
| Rapid traverse speed ( X-axis ) | 15m/min (590 ipm) | |||
| Rapid traverse speed ( Z-axis ) | 20m/min (787 ipm) | |||
| Cutting feed rate (Both axis) | 0.001-500mm/rev. | |||
| Turret | Tool station (Random) | H10....10 tools / H 12....12 tools | ||
| Size of external turning tool | H10....☐25mm / H12....☐20mm | |||
| Boring bar diameter | H10....Ø40mm(1.575") / H12....Ø32mm(1.26") | |||
| Tailstock | Quill diameter | Ø85mm (3.346") | ||
| Quill travel | 120mm (4.72") | |||
| Taper of center | MT. No.4 | |||
| Tailstock travel | 550mm (21.65") | |||
| Motor | Main spindle (continuous rated) | STD. AC9kW (12HP) OPT. AC11kW (15HP) | STD. AC11kW (15HP) OPT. AC15kW (20HP) | |
| Main spindle (30 min. rated) | STD. AC11kW (15HP) OPT. AC15kW (20HP) | STD. AC15kW (20HP) OPT. AC18.5kW (25HP) | ||
| Hydraulic oil pump | 2.2 kW (3HP) | |||
| Coolant pump | 375W (0.5HP) | |||
| Tank Capacity | Hydraulic tank | 65 Litre (14.3 gal.) | ||
| Coolant tank | 180 Litre(39.6 gal.) | |||
| Measurements | Weight ( Net / Gross ) Approx. | 5200kgs/5700kgs | 5500kgs/6000kgs | |
| Packing sizes | Length | 400mm (157.5") | ||
| Width x Height | Width 1890mm(74.41") x Height 2230mm(87.8") | |||
Specifications subject to change without notice.
CNE-20/H12 TOOLING INTERFERENCE
(Hydraulic turret 12 station, Tool holder Ø32, Tool shank ☐20) Unit:mm
CNE-26/H10 TOOLING INTERFERENCE
(Hydraulic turret 10 station, Tool holder Ø40, Tool shank ☐25) Unit:mm
SPINDLE STRUCTURE
(A2-6 Spindle nose, Bar capacity Ø52, N-208A6 power chuck) Unit:mm
Standard Accessories：
- CNC controller: FANUC 0i - TC
- Boring bar holder........2sets.
- O.D./facing tool holder....2sets.
- U drill holder...................1set.
- Boring socket : For H10....
* Ø12/Ø16/Ø20/Ø25/Ø32...1piece for each
* Drilling socket MT.3 x Ø40....1piece - Boring socket : For H12....
* Ø12/Ø16/Ø20/Ø25....1piece for each
* Drilling socket MT.2 xØ32....1piece - Chip conveyor & chip bucket cart.
- Pedal switch for chuck open & close.
- Hydraulic hollow chuck with rotary cylinder.
- Programmable tailstock with hydraulic clamp system.
- Hydraulic system with tank for power chuck, turret & tailstock quill.
- Work light.
- Coolant system.
- Heat exchanger.
- Rotating center MT.4......1set
- Machining finishing lamp.
- Auto lubrication system.
- Level pads .....6pcs.
- Toolset & box.
- Operation manual.
- Maintenance manual.
Optional Accessories：
- Auto door.
- Transformer.
- Collet chuck.
- Parts catcher.
- Auto tool pre-setter.
- CE configuration.
- Auto bar feeder w/interface.
- Air blow system
- VDI 30 x 12 tools / ☐20mm electronic type turret.
- Cs axis control & function with break system / VDI 30 revolving tool turret.
Optimum Structural Design A New Definition for Rigidity and Stability
With years of efforts of research and development, the Shun Chuan's slant bed CNC lathe will offer the unique rigidity. The design concept behind the CNE-20 / CNE-26 series is to enhance heavy duty, precision and stability. With its excellent machine structure, you can handle heavy cutting with more ease than ever before.
Complete Oil Fluid Separation
- In addition to the oil fluid separation design on X- and Z-axes, the cutting fluid tank is specially designed with a labyrinth construction to fully exhaust the floating oil.
- This assures no oil in the cutting fluid. Double filters in the fluid tank to ensure a clean recirculated fluid.
Programmable Tailstock
- The ruggedly constructed, programmable tailstock and quill movement can be controlled on the control panel for easy set-up and accurate positioning.
- Tailstock movement is driven by turret slide.
Tool Pre-Setter
- The tool pre-setter effectively reduces cutting tests while saving machining time.
- The mechanism is used for measuring the tool diameter and length.
- The tool adjustment arm is powered and program controlled.
Powerful Spindle Drive
- The spindle is driven by a powerful motor, providing great horsepower output for heavy duty machining.
机床商务网