机床商务网
详细介绍
| ITEM | MODEL | ATC-660X650 | ||||
|---|---|---|---|---|---|---|
| Machining Capability | Swing Over Bed | 660mm | ||||
| Max turning diameter | 300mm | |||||
| Main Spindle | Spindle Nose | A2-8 | ||||
| Spindle Bore | 102mm (available for 12" hyd. chuck) | |||||
| Spindle Speed (rpm) | 3000rpm | |||||
| Travel | X axis | 500mm | ||||
| Z axis | 650mm | |||||
| Thrust | X axis thrust force | 3282kgf | ||||
| Z axis thrust force | 4257kgf | |||||
| Feeds | X axis rapid traverse | 10M/min | ||||
| Z axis rapid traverse | 10M/min | |||||
| Motors | Main motor | FANUC A18 Spindle motor 18.5~22kw | ||||
| X axis servo motor | FANUC A22 servo motor 4.0kw, 22Nm, 3000rpm | |||||
| Z axis servo motor | FANUC A30 servo motor 7.0kw, 30Nm, 3000rpm | |||||
| Lubrication pump | 30W | |||||
| Coolant pump | 70 bar (opt) | |||||
| Hydraulic tank pump | 5hp (3.7kw) | |||||
| Milling Spindle | Taper | NT50 | ||||
| Max speed | 3300rpm | |||||
| Motor | FANUC A12 spindle motor 11~15KW (opt) | |||||
| Tank Capacity | Hydraulic Tank (Optional) | 70L | ||||
| Lubrication pump | 2L | |||||
| Coolant tank | 200L | |||||
| Ball Screw | X axis diameter | 40mm / pitch 10 | ||||
| Z axis diameter | 40mm / pitch 10 | |||||
| Tailstock | Quill Diameter | --- | ||||
| Quill Travel | --- | |||||
| Quill Taper | --- | |||||
| Measurement | Length | 3000mm | ||||
| Height | 2300mm | |||||
| Width | 2300mm | |||||
| Net weight (approx.)(kg) | 5500kg | |||||
| * Above specifications are subject to change without notice. Special requirement please contact with us. | ||||||
机床商务网