| MODEL | ATC-600 | ATC-700 | ATC-800 | ATC-900 |
|---|
| Machining Capability | Distance Between Centers | 1000 / 1500 / 2000 / 3000 / 4000 / 5000 / 6000 mm |
|---|
| Swing Over Bed | 600mm | 700mm | 800mm | 900mm |
| Swing over gap | 900x450 | 1000x450 | 1100x450 | 1200x450 |
| Main Spindle | Spindle Nose | D1-8,104mm : L 60~230, M 230~680, H 680~2000rpm |
|---|
| Spindle Bore | D1-11,130mm : L 40~130, M 130~400, H 400~1200rpm |
| Spindle Speed (rpm) | A2-11, 165mmz : L 20~110, M 110~320, H 320~660rpm |
| A2-15, 230mm : L 20~110, M 110~320, H 320~660rpm |
| Travel | X Axis | 460mm | 460mm | 460mm | 460mm |
|---|
| Y Axis (Optional) | +50mm | +100mm | +150mm | + 150mm |
| Z Axis | 1020/1520/2020/3020/4020/5020/6020mm |
| Feeds | X Axis Rapid Traverse | 15M/min |
|---|
| Y Axis Rapid Traverse (Optional) | 6M/min |
| Z Axis Rapid Traverse | 15M/min |
| Cutting Feed Rate | 0.001-500mm/rev (0.0004"-20"/rev) |
| Motors | Main Motor | Spindle Motor 22kw |
|---|
| X Axis Servo Motor | AC Servo Motor 3.0kw, 12Nm |
| Y Axis Servo Motor (0pt) | AC Servo Motor 3.0kw, 12Nm, ABS |
| Z Axis Servo Motor | AC Servo Motor 6.0kw, 38Nm |
| Lubrication Pump | 100 W |
| Coolant Pump | 450W, 6~10 bar |
| Hydraulic Tank Pump(Optional) | 5hp (3.7kw) |
| Tank Capacity | Hydraulic Tank (Optional) | 70L |
|---|
| Lubrication Pump | 2L |
| Coolant Tank | 100L |
| Ball Screw | X Axis Diameter | 30mm / pitch 10 |
|---|
| Y Axis Diameter | 30mm / pitch 10 |
| Z Axis Diameter | 50mm / pitch 10 |
| Tailstock | Quill Diameter | 115mm / 160mm (OPT.) |
|---|
| Quill Travel | 270mm |
| Quill Taper | MT6 |
| Length (mm) | 3900/ 4400/ 4900/ 5900/ 6900/ 7900/8900mm |
|---|
| Width (mm) | 2300mm |
|---|
| Height (mm) | 2300mm |
|---|
| N.W (kg) | 8500/ 9500/ 10500/ 12000/ 14000/ 16000/ 18000 |
|---|
机床商务网
机床商务网