DY-410VS~510VS (BED305/330MM)-Variable Speed Lathes-岸揚機械股份有限公司

参考价	面议

详细介绍

MODEL		DY-410VS	DY-510VS
SWING	Distance Between Centers	1000 / 1500 mm	1100 / 1600 / 2100 / 3100 mm
	Swing Over Bed	410 mm	510 mm
	Swing Over Cross Slide	230 mm	320 mm
	Swing Over Gap	640 mm	760 mm
	Height of Center (Over Bed)	205 mm	255 mm
BED	Width	305 mm	330 mm
HEADSTOCK	Spindle Nose & Bore	D1-6 54 mm	D1-8, 80 mm	102mm (Opt)
HEADSTOCK	Spindle Speed (rpm)	L: 25 ~ 350 M: 70 ~ 1000 H: 180 ~ 2700	L:60 ~ 230 M: 170 ~ 680 H: 550 ~2000	L: 50 ~ 220 M: 120 ~ 650 H: 220 ~ 1800
FEEDS - THREAD	Leadscrew	Ø35 mm. 4T.P.I. or 6 pitch
	Number of Feed Changes	32
	Longitudinal Feed Range	0.04 ~ 1.0 mm/rev
	Cross Feed Range	with rapid traverse: 0.02-0.5 mm/rev ; without rapid traverse: 0.04-1.0 mm/rev
	Inch Threads	37 Kinds, 2 ~ 56 T.P.I
	Metric Threads	41 Kinds, P0.2 ~ 14
	D.P. No. / range	19 Kinds D.P 8 ~ 44
	Module Pitches No. / Range	18 Kinds M 0.3 ~ 3.5
TOOL SLIDE	Cross Slide Travel	240 mm	260 mm
TOOL SLIDE	Compound Rest Travel	95 mm	127 mm
TAILSTOCK	Quill Travel	120 mm	130 mm
	Quill Diameter	65 mm	75 mm
	Taper of Center	MT#4	MT#5
MOTOR	Main Motor	7.5 hp / 10 hp (Opt)	10 hp / 12.5 hp (Opt)
MOTOR	Coolant Pump	1/8 hp
Length (mm)	2400 / 2900mm		2470 / 2970 / 3470/3970mm
Width (mm)	1100		1100
Height (mm)	1800		1880
N.W (kg)	1700 / 2000Kgs		/2000 / 2300 / 2800 / 3600Kgs

* Above specifications are subject to change without notice. Special requirement please connect with us.
Workpiece Weight Capacity	Chuck only	Chuck + Tailstock	Chuck + 1 Steady rest + Tailstock	Chuck + 2 Steady rest + Tailstock
Spindle bore 54mm	80kg	300kg	450kg	700kg
Spindle bore 80-102mm	300kg	800kg	1000kg	1500kg