DY-1100G~1500G (BED 692MM)-Manual Lathes-岸揚機械股份有限公司

参考价	面议

详细介绍

MODEL		DY-1100G	DY-1200G	DY-1300G	DY-1400G	DY-1500G
SWING	Distance Between Centers	1500/2000/2500/3000/4000/5000/6000/7000/8000/9000/10000/ 11000/12000/13000/14000/15000/16000/17000/18000/19000/20000/ 21000/22000/23000/24000/25000mm
	Height of Center (Over Bed)	550mm	600 mm	650 mm	700 mm	750 mm
	Swing Over Bed	1100 mm	1200 mm	1300 mm	1400 mm	1500 mm
	Swing Over Cross Slide	730mm	830 mm	930 mm	1030 mm	1130 mm
	Swing Over Gap	1600x750	1700x750	1800x750	1900x750	2000x750
BED	Width	692mm
HEADSTOCK	Spindle Nose	ISO A2-11 / A2-15 / A2-20 / A2-28 153mm(STA.) / 230mm(OPT.) / 310 / 360mm(OPT.) / 410mm(OPT.)
	Spindle Bore
	Spindle Speed (rpm)	3~420rpm
	Number of Spindle Speed	12 steps
FEEDS - THREAD	Leadscrew	Ø58 mm. 2T.P.I. or 12 pitch
	Longitudinal Feed Range	0.0100 ~ 1.4145 mm/rev
	Cross Feed Range	0.0102 ~ 0.5735 mm/rev
	Inch Threads	35 Kinds, 1 ~ 59 T.P.I
	Metric Threads	34 kinds, 0.5~18mm
TOOL SLIDE	Cross Slide Travel	750 mm
TOOL SLIDE	Compound Rest Travel	350 mm
TAILSTOCK	Quill Travel	350 mm
	Quill Diameter	125mm / 180mm (OPT.)
	Taper of Center	MT#6
MOTOR	Main Motor	40HP X 4P / 50HP X 4P(OPT.)
	Rapid Feed Motor	1/2 HP
	Coolant Pump	1/2 HP
Length (mm)	4000/4500/5000/5500/6500/7500/8500/9500/10500/11500/12500/13500/14500/15500 16500/17500/18500/19500/20500/21500/22500/23500/24500/25500/26500/27500
Width (mm)	2100
Height (mm)	1900	2000	2100	2200	2300
N.W (kg)	8750/9500/10250/11000/12500/14000/15500/17000/18500/20000/21500/23000/24500/26000 27500/29000/30500/32000/33500/35000/36500/38000/39500/41000/42500/44000

* Above specifications are subject to change without notice. Special requirement please connect with us.
Workpiece Weight Capacity	Chuck only	Chuck + Tailstock	Chuck + 1 Steady rest +Tailstock	Chuck + 2 Steady rest + Tailstock
Spindle bore 153mm	1500kg	5000kg	8000kg	12000kg
Spindle bore 230-410mm	1900kg	5400kg	8400kg	12400kg