Long Shaft CNC Lathe-CNC Lathes-岸揚機械股份有限公司

参考价	面议

详细介绍

MODEL		DY-1000C	DY-1100C
Machining capability	Distance between centers (mm)	2000/3000/4000/5000/6000/7000/8000/9000/10000/11000/~30000
	Swing over bed	1000mm	1100mm
	Swing over carriage	660mm	760mm
Bed	Width	1040mm
Main spindle	Spindle nose	D1-11, 130mm, L 40-130, M 130-400, H 400-1200rpm A2-11, 165mm, L 20-110, M 110-320, H 320-660rpm A2-15, 230mm, L 20-110, M 110-320, H 320-660rpm A2-20, 310mm, L 20-100, M 100-200, H 200-400rpm
	Spindle bore
	Spindle speed (rpm)
Travel	Cross travel (X axis)	520mm	550mm
Travel	Longitudinal travel (Z axis)	Same as distance between centers
Feeds	X axis rapid traverse	5M/min
	Z axis rapid traverse	5M/min
	Cutting feed rate	0.001-500mm/rev (0.0004”-20”/rev)
Motors	Main motor	Fanuc or Siemens spindle motor 22kw
	Inverter	---
	X axis servo motor	Fanuc or Siemens servo motor 2.49kw/11.9Nm
	Z axis servo motor	Fanuc or Siemens servo motor 8.31kw/39.7Nm
	Oil pump	80W
	Coolant pump	450W, 6~10bar
	Hydraulic tank pump (optional)	3hp (2.2kw)
Tank capacity	Hydraulic tank (optional)	20L
Tank capacity	Lubrication pump	8L
Ball screw	X axis diameter	40mm, pitch 10
Ball screw	Z axis diameter	1000~6000: 63mm / 7000~8000: 80mm / 9000~: gear rack
Tailstock	Quill diameter	115mm (sta.) / 160mm (opt.) / 250mm (opt.)
	Quill travel	270mm
	Quill taper	MT6
Length (mm)	5280 / 6280 / 7280 / 8280 / 9280 / 10280 / 11280 /12280 / 13280 / 14280 ~ mm
Width (mm)	3140 mm
Height (mm)	2530 mm
N.W. (kg)	12500 / 14900 / 17300 / 19800 / 22400 / 24800 / 27200 / 29600 / 31900 / 34300 ~

* Above specifications are subject to change without notice. Special requirement please connect with us.
Weight capacity	Chuck only	Chuck + Tailstock	Chuck + 1 Steady rest + Tailstock	Chuck + 2 Steady rest + Tailstock
Spindle bore 130mm	1000kg	4500kg	6500kg	7500kg
Spindle bore 160mm	1500kg	5000kg	7000kg	8000kg
Spindle bore 230mm	1500kg	5500kg	7500kg	8500kg