机床商务网
详细介绍
| MODEL | DY-660C | DY-760C | DY-860C | DY-1000C | DY-1100C | |
|---|---|---|---|---|---|---|
| Machining Capability | Distance Between Centers | 1000 / 1500/ 2000 / 3000 / 4000 / 5000 / 6000 / 7000 / 8000 / 9000 / 10000 / 11000 / 12000 / 13000 / 14000 / 15000 / 16000 | ||||
| Swing Over Bed | 660 mm | 760 mm | 860 mm | 1000 mm | 1100 mm | |
| Swing Over Cross Slide | 310 mm | 410 mm | 510 mm | 650 mm | 750 mm | |
| BED | Width | 558 mm | ||||
| Main Spindle | Spindle Nose | D1-11, 130 mm, L: 40-130, M: 130-400, H: 400-1200 A2-11, 165 mm, L: 20-110, M: 110-320, H: 320-660 A2-15, 230 mm, L: 16-61, M: 50-190, H: 150-570 A2-20, 310 mm, L: 20-100, M: 100-200, H: 200-400 A2-20, 360 mm, L: 20-100, M: 100-200, H: 200-300 A2-28, 410 mm, L: 20-100, M: 100-200, H: 200-250 | ||||
| Spindle Bore | ||||||
| Spindle Speed (rpm) | ||||||
| Spindle Taper | MT15 | |||||
| Travel | Cross Travel (X Axis) | 330 mm | 380 mm | 430 mm | 500 mm | 550 mm |
| Standard tool post 240 x 240mm, larger tool post might cause travel reduced. | ||||||
| Longitudinal Travel (Z Axis) | DBC-350 | |||||
| Feeds | X Axis Rapid Traverse | 5 M/min | ||||
| Z Axis Rapid Traverse | 5 M/min | |||||
| Cutting Feed Rate | 0.001 - 500 mm/rev (0.0004" - 20"/rev) | |||||
| Motors | Main Motor | 30 hp | 30 hp | 40 hp | 40 hp | 40 hp |
| Inverter | 30 hp | 30 hp | 40 hp | 40 hp | 40 hp | |
| X Axis Servo Motor | Siemens or Fanuc or Fagor AC servo motor FXM53, 11.9 Nm, 2.49 kw, 2000 rpm | |||||
| Z Axis Servo Motor | Siemens or Fanuc or Fagor AC servo motor FXM76, 39.7 Nm, 8.31 kw, 2000 rpm | |||||
| Oil Pump | 100 W | |||||
| Coolant Pump | 450 W, 6 ~ 10 bar | |||||
| Hydraulic Tank Pump (Optional) | 3 hp (2.2 kw) | |||||
| Tank Capacity | Hydraulic Tank (Optional) | 20 L | ||||
| Lubrication Pump | 8 L | |||||
| Ball Screw | X Axis Diameter | 40 mm | ||||
| Z Axis Diameter | 1000 ~ 6000: 63 mm, 7000 ~ 10000: 80 mm, 10000 ~ 160000: Gear Rack | |||||
| Tailstock | Quill Diameter | 115 mm / 160 mm (OPT.) | ||||
| Quill Travel | 300 mm | |||||
| Quill Taper | MT6 | |||||
| Length (mm) | 4080 / 4580 / 5080 / 6080 / 7080 / 8080 / 9080 / 10080 / 11080 / 12080 / 13080 / 14080 / 15080 / 16080 / 17080 / 18080 / 19080 | |||||
| Width (mm) | 2710 | |||||
| Height (mm) | 2330 | |||||
| N.W (kg) | 7700 / 8400 / 9100 / 10500 / 11900 / 13300 / 14700 / 16100 / 17500 / 18900 / 20300 / 21700 / 23100 / 24500 / 25900 / 27300 / 28700 | |||||
| * Above specifications are subject to change without notice. Special requirement please connect with us. | ||||||
机床商务网