机床商务网
详细介绍
- SECOND-CUT technology
This unique feature can only be found on all INNOVATOR guillotines. When using the knife in the second position, a thin clip approx. 1 mm is cut off the veneer pack after the first trim. This Second-Cut feature can be necessary when working with thick or specially hard veneers. - Hydraulic-Driven for Knife and Pack Beam
All INNOVATR guillotines are completely hydraulic on both knife and pack beam. As a result, the pressure on knife and pack beam is individually adjustable and no mechanical damage will injure the machine in case that the machine is overload. Seen from a safety point of view, the knife and pack beam will return to top-position immediately if the cutting cycle is broken. - Security
All INNOVATR guillotines are featured with two-hａnd operation of knife and pack beam. The movement of the pack beam against the veneer pack stops immediately if only one push button is released. - INNOVATOR Guillotines
The CUTMATE series, are constructed with a view to the highest security of the operator’s assistants without causing inconvenience to the working. All INNOVATOR guillotines are completely hydraulic on both knife and pack beam.
| Model | CutMate 2800 | GCutMate 3200 |
| Cutting Length | 2800 mm (Other Length upon Request) | 3200 mm (Other Length upon Request) |
| Daylight Opening | 120 mm | 120 mm |
| Hydraulic Motor | 10 HP | 10 HP |
| Rear Fence Motor | 0.5 HP | 0.5 HP |
| Pack Beam Width | 150 mm | 150 mm |
| Rear Parallel Fence | 25 ~ 675 mm | 25 ~ 675 mm |
| Machine Dimensions (L x W x H) | 4600 x 1650 x 2100 mm | 5000 x 1650 x 2100 mm |
| Net Weight | 4600 kg | 5500 kg |
*Technical data is not binding and can be modified without prior notice.
1.
机床商务网