机床商务网
详细介绍
- Preloaded spindle bearings assembled with fine craftsmanship to ensure precision cutting performance.
- Inserted alloy steel table is carbonized and hard chrome plated for dependable wear resistance and rigidity for years of operations.
- Additional feed rollers make feeding problem stock easy.
- A specially designed gear box provides high torque output accurate transmission and a long service life.
- COMPREHENSIVE SAFETY FEATURES: - Circuit will break if the cutterhead is touched. - The cell sensor detects elevation of the entire feeding mechanism. - The end switch allows for convenient machine running tests.
- Anti-rust treatment for the machine frame.
Look into the difference in the POM 4-SIDE Moulders
Extraording Performance.
-
FLOATING ROLLERS.
The pneumatically controlled universal joint under table creates a floating effect, for outstanding smoothness during stock feed. Choice of 4 or 5 floating rollers. -
INSERTED ALLOY STEEL TABLE
Eliminating the conventional hard chrome plated table, POM moulders are designed with an inserted table, carbonized and hard chrome treated for dependable maximum wear resistance. -
MECHANICAL DIGITAL READOUT
Each spindle is available to be fitted with a mechanical digital readout for accurate spindle setting.
OPTIONAL:
-
FULLY ENCLOSED SPLASH GUARD (Optional)
The guard not only provides maximum safety protection for the operator, but also reduces noise to a minimum during cutting operations. -
FULL GROOVE TABLE (Optional)
Fitted between the 1st spindle and the initial spindle on the rear bottom spindle set. -
FEED MAGAZINE (Optional)
his feed magazine enables continuous automatic stock feed that greatly increases efficiently. -
UNIVERSAL SPINDLE (Optional)
The universal spindle can be swivelled 240* for moulding operations.
MODEL IDENTIFICATION
U: Floating table roller
C: Inserted alloy steel table
D: Mechanical Digital readout
V: Fully enclosed splash guard
X: Horizontal spindle support
H: Universal spindle
S: Short stock feed roller
G: Full groove table
F: Feed magazine
T: Tilting feed roller
I: Frequency inverter
U: Floating table roller
C: Inserted alloy steel table
D: Mechanical Digital readout
V: Fully enclosed splash guard
X: Horizontal spindle support
H: Universal spindle
S: Short stock feed roller
G: Full groove table
F: Feed magazine
T: Tilting feed roller
I: Frequency inverter
| MODEL | SHG-906U.C.D |
| Maximum width of cut | 230mm |
| Maximum height of cut | 125mm |
| Horziontal top spindle motor | 7.5HP,10HP |
| Horziontal bottom spindle motor | 7.5HP,10HP |
| Right vertical spindle motor | 7.5HP |
| Left vertical spindle motor | 7.5HP |
| Feed drive motor | 7.5HP |
| Elevation motor | 1HP |
| Spindle speed | 6000R.P.M. |
| Feed speed | 4.5-26M/min,4.5~30M/min (inverter) |
| Spindle diameter | 50mm |
| Standard cutter diameter | 125mm |
| Maxi 1st bottom spindle diameter | 155mm |
| Maxi Right vert. spindle diameter | 180mm |
| Maxi Left vert. spindle diameter | 180mm |
| Maxi Horz. top spindle diameter | 180mm |
| Maxi Rear bottom spindle diameter | 180mm |
| Net weight | 4200kgs |
| Gross weight | 4800kgs |
| Packing dimensions | 5330x1950x1830mm |
| Universal spindle (Option) | 10HP, 7.5HP |
| Multiple rip saw (Option) | 20HP, 25HP, 30HP |
All specifications, dimensions and design characteristics shown in this catalogue are subject to change without notice.
机床商务网