机床商务网
详细介绍
- Preloaded spindle bearings assembled with fine craftsmanship to ensure precision cutting performance.
- Additional feed rollers make feeding problem stock easy.
- A specally designed gear box provides high torque output,accurate
transmission and a long service life. - COMPREHENSIVE SAFETY FEATURES:
-Circuit will break if the cutterhead is touched.
-The cell sensor detects elevation of the entire feeding mechanism.
-The end switch allows for convenient machine running tests. - Anti-rust treatment for the machine frame.
- Table surface is hardened, precision ground.
- Wear resistant alloy steel table inserts are provided at bottom spindles.
Entire table surface is hard-chome plated for wear resistance. - All spindle adjustments are by universal jointer for easy and precise abjustment.
Mechanical digital readout shown in picture is optional.
-
MECHANICAL DIGITAL READOUT
Each spindle is available to be fitted with a machanical digital readout for accurate spindle setting.
-
FLOATING ROLLERS.
The pneumatically controlled universal joint under table creates floating roller and single idle roller SHG-86U.M.D., for outstanding smoothness during stock feed.
-
FRONT AND REAR TABLE FOR HORIZONTAL SPINDLE
The front and rear table for the horizontal spindle is manufactured from high quality alloy steel for high wear resistance.The entire table is hard chrome plated for maximum wear resistance.
-
SHORT STOCK FEED ROLLER
The additional feed rollers are fitted at the front of the 2nd spindle, suited for smooth feeding of short stock, positively and smooth feeding.
OPTIONAL:
-
FULLY ENCLOSED SPLASH GUARD (Optional)
The guard not only provides maximum safety protection for the operator, but also reduces noise to a minimum during cutting operations. -
FEED MAGAZINE (Optional)
This feed magazine enables continuous automatic stock feed that greatly increases working efficiency up to 30%. Stock can be loaded with concave side up or down. -
UNIVERSAL SPINDLE (Optional)
The universal spindle can be swivelled 240° for moulding operations.
-
FREQUENCY INVERTER (Optional)
The workpiece feed is controlled by a frequency inverter, providing variable speed change ranging 4-36m/min to suit various types of wood material, and for coarse and fine machining. The frequency inverter is equipped with a key for safety.
| MODEL | SHG-85U / SHG-85U.M.D. |
| Maximum width of cut | 200mm |
| Maximum height of cut | 125mm |
| Horziontal top spindle motor | 10HP |
| Horziontal bottom spindle motor | 7.5HP,10HP |
| Right vertical spindle motor | 7.5HP |
| Left vertical spindle motor | 7.5HP |
| Feed drive motor | 5HP |
| Elevation motor | 1HP |
| Spindle speed | 6000R.P.M. |
| Feed speed | 4.5-26M/min,4.5~30M/min (inverter) |
| Spindle diameter | 40mm |
| Standard cutter diameter | 125mm |
| Maxi 1st bottom spindle diameter | 125mm |
| Maxi Right vert. spindle diameter | 160mm |
| Maxi Left vert. spindle diameter | 160mm |
| Maxi Horz. top spindle diameter | 180mm |
| Maxi Rear bottom spindle diameter | 180mm |
| Net weight | 2900kgs |
| Gross weight | 3400kgs |
| Packing dimensions | 4013x1700x1828mm |
| Universal spindle (Option) | 10HP, 7.5HP |
| Multiple rip saw (Option) | 20HP, 25HP, 30HP |
All specifications, dimensions and design characteristics shown in this catalogue are subject to change without notice.
机床商务网