机床商务网
详细介绍
| Description/MODEL | Unit | MA-S4260(i) | MA-S4280(i) | MA-S42120(i) | MA-S42160(i) | MA-S42200(i) | MA-S42240(i) | MA-S42280(i) | ||
| CAPACITY |
|
| ||||||||
| Center height | mm | 565 | ||||||||
| Swing over bed | mm | 1070 | ||||||||
| Swing over gap | mm | 1520 | ||||||||
| Swing over cross slide | mm | 744 | ||||||||
| Distance between center | mm | 1700 | 2200 | 3200 | 4200 | 5200 | 6200 | 7200 | ||
| Bed width | mm | 610 | ||||||||
| SPINDLE |
|
| ||||||||
| Spindle bore | mm | Ø155 (6") | Ø230(9") opt. | Large spindle bores are available on request | ||||||
| Spindle nose | - | A2-11 | A2-15 | |||||||
| Spindle speeds 18 steps | rpm | 5~615 | 4~430 | |||||||
| Inverter type (Variable speeds) | H: 188~710 M: 40~187 L: 7~39 | H: 116~500 M: 31~115 L: 6~30 | ||||||||
| TRAVEL |
|
| ||||||||
| Gross slide travel | mm | 700 | ||||||||
| Compound rest travel | mm | 380 | ||||||||
| TAILSTOCK |
|
| ||||||||
| Tailstock spindle dia. | mm | 165 | ||||||||
| Tailstock spindle travel | mm | 300 | ||||||||
| Tailstock spindle taper | - | MT#6 | ||||||||
| THREADS |
|
| ||||||||
| Lead screw | - | 2 TPI or 12 mm/pitch Ø55 | ||||||||
| Metric pitch threads | - | 1 - 30 mm | ||||||||
| Inch pitch threads |
| 30 - 1 TPI | ||||||||
| Module pitch threads | - | 0.5 - 15 M | ||||||||
| DP threads | - | 60 - 2 TPI | ||||||||
| FEEDING RANGE |
|
| ||||||||
| Range of longitudinal feeds | mm/rev. | 0.07 – 2.03 | ||||||||
| Range of cross feeds | mm/rev. | 0.028 - 0.81 | ||||||||
| MOTOR |
|
| ||||||||
| Main spindle motor | HP | 20 / 25 / 30 (opt.) | ||||||||
| Coolant pump motor | HP | 1/6 | ||||||||
| WEIGHT |
|
| ||||||||
| Net Weight | kg | 6600 | 7000 | 7800 | 8600 | 9200 | 10000 | 10800 | ||
Note:
We have the right tomodify the specification or designs. If there are subjected to change without
prior notice.
MA-S4200(i) Series
ACCESSORIES
| STANDARD ACCESSORIES |
| OPTIONAL ACCESSORIES |
| l Main drive motor | l CE conformity | |
| l Coolant equipment | l Gap bed | |
| l Magnetic brake for spindle motor | l Digital Readout System | |
| l 4-way tool post | l 3-Jaw scroll chuck | |
| l Six position rapid travel (including compound tool post) | l 4-jaw independent chuck | |
| l Tail stock | l Double chuck system | |
| l Center sleeve | l Rear chuck adaptor | |
| l Dead center | l Face plate type 4-jaw chuck | |
| l Tool box & tools | l Taper attachment | |
| l Independent Electrical Box | l Moving rear splash guard | |
| l Operation & Service Manual | l Chuck guard | |
|
|
| l Chip and coolant shield |
|
|
| l Leadscrew guard |
|
|
| l Work light |
|
|
| l Steady rest |
|
|
| l Follow rest |
|
|
| l Rotating center |
|
|
| l Grinding attachment |
|
|
| l Tailstock type (Build in type quill) |
机床商务网