机床商务网
详细介绍
DESCRIPTION
•Better performance than conventional lathes
•3-step speeds, each in variable speed change.
•Speed change by auto shifting.
•More convenient turning processing control & spindle speed shown on rpm meter.
•Braking controlled by quick inverter stop.
•Through cross feeding at fixed spindle speed, you´ll get the fine accuracy & speed for slide face of round plate (similar to CSS function).
•Through cross feeding for step turning, the spindle speed change can match and achieve rapid effect
| Description/MODEL | Unit | MA- 3360(i) | MA- 3380(i) | MA- 33120(i) | MA- 33160(i) | MA- 33200(i) | MA- 33240(i) | ||
| CAPACITY |
|
| |||||||
| Center height | mm | 420 | |||||||
| Swing over bed | mm | 840 | |||||||
| Swing over gap | mm | 1080 (opt.) | |||||||
| Swing over cross slide | mm | 590 | |||||||
| Distance between center | mm | 1600 | 2100 | 3100 | 4100 | 5100 | 6100 | ||
| Bed width | mm | 450 | |||||||
| SPINDLE |
|
| |||||||
| Spindle bore | mm | Ø105(4") | Ø155(6")opt. | Ø230(9")opt. | Ø305(12")opt. | ||||
| Spindle nose | - | A1-11 | A2-11 | A2-15 | A2-20 | ||||
| Spindle speeds 18 steps | rpm | 23~1293 | 13~690 | 5~440~5 | - | ||||
| Inverter type (Variable speeds) | H: 331~1500 M: 93~330 L: 20~92 | H: 176~800 M: 53~175 L: 10~52 | H: 108~450 M: 31~107 L: 6~30 | H: 80~350 M: 18~79 L: 5~17 | |||||
| TRAVEL |
|
| |||||||
| Gross slide travel | mm | 450 | |||||||
| Compound rest travel | mm | 250 | |||||||
| TAILSTOCK |
|
| |||||||
| Tailstock spindle dia. | mm | 105 | |||||||
| Tailstock spindle travel | mm | 220 | |||||||
| Tailstock spindle taper | - | MT#5 | |||||||
| THREADS |
|
| |||||||
| Lead screw | - | 2 TPI or 12 mm/pitch Ø45 | |||||||
| Metric pitch threads | - | 0.8 - 14 mm/pitch (65 kinds) | |||||||
| Inch pitch threads | - | 2 - 28 TPI (36 kinds) | |||||||
| Module pitch threads | - | 0.5 - 7 M (22 kinds) | |||||||
| DP threads | - | 4 - 56 TPI (36 kinds) | |||||||
| FEEDING RANGE |
|
| |||||||
| Range of longitudinal feeds | mm/rev. | 0.05 - 0.7 | |||||||
| Range of cross feeds | mm/rev. | 0.025 - 0.35 | |||||||
| MOTOR |
|
| |||||||
| Main spindle motor | HP | 15 / 20 or 25(opt.) | |||||||
| Coolant pump motor | HP | 1/8 | |||||||
| WEIGHT |
|
| |||||||
| Net Weight Approx. | kg | 3450 | 3700 | 4200 | 4700 | 5200 | 5800 | ||
Note:
Wehave the right to modify the specification or designs. If there are subjectedto change without
prior notice.
MA-3300(i) Series
ACCESSORIES
| STANDARD ACCESSORIES |
| OPTIONAL ACCESSORIES |
| l Main drive motor | l CE conformity | |
| l Coolant equipment | l Gap bed | |
| l Electromagnetic brakes | l Digital Readout System | |
| l X / Z-axis rapid travel | l 3-Jaw scroll chuck | |
| l 4-way tool post | l 4-jaw independent chuck | |
| l Tail stock | l Double chuck system | |
| l Center sleeve | l Rear chuck adaptor | |
| l Dead center | l Face plate | |
| l Tool box & tools | l Quick change tool post | |
| l Independent Electrical Box | l Taper attachment | |
| l Operation & Service Manual | l Full length splash guard | |
|
|
| l Moving rear splash guard |
|
|
| l Chuck guard |
|
|
| l Chip and coolant shield |
|
|
| l Leadscrew guard |
|
|
| l Work light |
|
|
| l Steady rest |
|
|
| l Follow rest |
|
|
| l Micro-meter bed stopper |
|
|
| l Turret type 5-position bed stopper |
|
|
| l Rotating center |
|
|
|
|
机床商务网