CNC Lathe

CNC LATHE (Flat-bed type)

Model: 1440NC

FEATURES:

˙FANUC, FAGOR, SIEMENS, SYNTEC control areavailable.

˙CNC and manual operation.

˙Electronic hand-wheels for manual turning.

˙Teach in mode.

˙Integrated PLC.

˙Semi-automatic, automatic (cycle) and partprogram modes.

˙Rapid traverse.

˙Automatic home searching.

˙30-2000 R.P.M. infinite variable spindlespeed.

˙38mm. 1-1/2inch hole through spindles.

˙2-point supported spindle using 2precision taper roller bearings.

˙All geared headstock, main gears are made from Chromium, Nickel,molybdenum alloy steel and are case hardened and “REISHAUER" ground.

˙Forced spray lubrication system used forheadstock.

˙High precision ball-screws.

˙Hardened of bed-way & cross ways meetHB 450.

˙Auto lubrication unit for all slide-wayssurface and ball-screws.

˙5HP 3.5KW Main motor or 7.5HP 5.7kw mainservo motor.

HEADSTOCK

˙The headstock is made of high quality cast iron (FC30) all shafts andgears are of high tensile tensil steel and are hardened and ground.

˙3 spindle speeds 30-2000 rpm. Low speed provides High torque output forheavy duty cutting. Hi speed is for finish cutting.

˙Hardened and ground main spindle issupported by precision taper roller bearing.

˙Headstock have inner oil reservoir inwhich lubrication worked by splashing lubricant.

BED WAY

˙Meehanite cast iron bed is heavily ribbed.

˙The bed ways are induction hardened to HS70 and precision ground.

CARRIAGE

˙Automatic lubrication system continuouslysupplies lubricating oil to carriage and cross-slide.

TAILSTOCK

˙Tailstock is of rigid construction andfeatures super tight clamp locked by clamp lever.

˙M.T. #3 barrel internal taper providesheavy support for live centers or tip center.

˙The quill is hardened and ground withinches and metric graduations.

STANDARDACCESSORIES:

1. CNC control system.

2. 3 Jaw chuck 6 inch (165mm) with backplate.

3. Manual Quick change tool post.

4. Steady rest

5. Automatic lubrication system

6. Coolant pump system

7. Electrical hａnd wheel

8. Work lamp

9. Signal lamp

10. Safety guard

11. Toolbox with tools.

12. Center sleeve

13. Two dead centers

14. Camlock spindlewrench.

15. Oil gun

16. Optional manual andpart list

OPTIONALACCESSORIES:

1. 3-jaw strong scroll chuck

2. 4-jaw independent chuck

3. Face plate

4. Follow rest

5. Electrical 4 way tool post

6. Live center M.T.#3.

7. Drilling chuck ½in. (13mm)

8. Hydraulic chuck system 3 jaw 6" chuck

9. Hydraulic tailstock

10. Transformer

11. CE Standard Equipment

We reverse the right to modify and improve our products.