机床商务网
详细介绍
- 每支 FMA 面铣刀杆均附有螺丝及挡耳以装配面铣刀盘使用
- 请于订购时，确认刀杆为英制或公制
- 面铣刀盘为另购品
| 型号 | D | D1 | D2 | L | L1 | W | H | G | 公/英制 牙 |
|---|---|---|---|---|---|---|---|---|---|
| NT40 FMA25.4-L | 25.4 | 60 | 33 | 50/75 100 | 20 | 9.5 | 13 | M12 | 5/8"-11 M16x2.0P |
| NT40 FMA31.75-L | 31.75 | 70 | 40 | 22 | 12.7 | 13.5 | M12 | ||
| NT40 FMA38.1-L | 38.1 | 85 | 50 | 23 | 15.9 | 15 | M16 | ||
| NT40 FMA50.8-L | 50.8 | 95 | 65 | 24 | 19.05 | 16 | M16 | ||
| NT50 FMA25.4-L | 25.4 | 60 | 33 | 50/75 100/125 150/200 300 | 20 | 9.5 | 13 | M12 | 1"-8 M24x3.0P |
| NT50 FMA31.75-L | 31.75 | 70 | 40 | 22 | 12.7 | 13.5 | M12 | ||
| NT50 FMA38.1-L | 38.1 | 85 | 50 | 23 | 15.9 | 15 | M16 | ||
| NT50 FMA50.8-L | 50.8 | 95 | 65 | 24 | 19.05 | 16 | M16 | ||
| NT50 FMA47.625-L | 47.625 | 128.57 | - | 32 | 25.4 | - | - |
Unit: mm
机床商务网