机床商务网
详细介绍
可靠的自动化刀库
Reliable automatic tool library
自动换刀装置由刀具库和换刀臂组成。自勤换刀装置舆机床分开安装，目的是防止自动换刀装置运转时的振动或其它原因对加工精度产生不利的影响。选刀采用短路径固定地址方法。所有的刀具均返回原位，因此有关大尺寸刀具的碰撞问题仅需在安装时考虑壹次。
Reliable automatic tool library
The automatic tool changing device consists of tool library and tool changing arm. Self-service tool changer is installed separately from machine tool in order to prevent the vibration of automatic tool changer or other reasons from adversely affecting the processing accuracy. The shortest path fixed address method is adopted in tool selection. All cutters return to their original position, so the collision problem of large-sizedcutters only needs to be considered once during the first installation. The shortest path is adopted in the two-way tool library.
快捷而简便的日常检查
• 润滑控制单元与气压单元都集中安装在机床的操作侧，便于日常维护时的检查。
Quick and Simple Daily Inspection
Quick and Simple Daily Inspection
• Lubrication control unit and air pressure unit are centrallyinstalled in the operation side of the machine tool, which is convenient for routine maintenance inspection.
重视作业人员工作效率的设计
• 既拓宽了作业人员的踏板，缩短了工件和操作面板间的距离，有助于提高操作与装夹作业的效率，并提高操作者的安全性。
Emphasis on the design of operators'work efficiency
• It not only enlarges the pedals of operators, shortens the distance between workpieces and operation panels, but also helps to improve the efficiency of operation and clamping operation, and improves
the safety of operators.
排屑处理
•通过中心槽从主轴正下方直接排出切削
• 护罩使得切屑不堆积，保持加工室内清洁排屑处理
Chip removal
•Cutting is directly discharged from the lower part of the spindle through the central groove.
•The shield keeps the chips from piling up and keeps the processing room clean.
液压系统
• 彩用那智不二越液压站，稳定性高。
• 彩用那智不二越液压站，稳定性高。
Hydraulic system
•The color use of Nazhiyiyue hydraulic station has high stability.
| 型号 Model | H500(II) | H630(II) | H800(II) |
| X 轴行程 X-axis travel | 750mm | 1050mm | 1300mm |
| Y 轴行程 Travel 丫-axis | 750mm | 1000mm | 1200mm |
| z 轴行程 Z-axis travel | 750mm | 1000mm | 1200mm |
| 主轴中心至工作台面 Spindle Center to Workbench | 50-800mm | 80-1080mm | 45-1245mm |
| 主轴鼻端至工作台中心 Spindle nose end to worktable Center | 135-885mm | 135-1135mm | 150-1350mm |
| 主轴锥度 Spindle taper | BT50 | BT50 | BT50 |
| 主轴转速(标配）Spindle speed (standard) | 6000rpm/min | 6000rpm/min | 6000rpm/min |
| 主轴转速(选配）Spindle speed (optional) | 12000rpm/min | 10000/12000rpm/min | 10000、12000rpm/min |
| 标配主轴 Standardized spindle | 直传式 | 齿轮式 | 齿轮式 |
| 选配主轴 Selection of spindle | 皮带式 | 电主轴 | 电主轴 |
| 盘面大小(长 X 宽）Disk Size (Long X Width) | 500X500mm | 6300X630mm | 800X800mm |
| 分割角度 Minimum Segmentation Angle | 1°(标配）0.001°(选配） | r(标配）o.oor(选配） | 1°(标配）o.oor(选配） |
| 工作台载重 Maximum load of worktable | 600kg | 1200kg | 2000kg |
| 工作台数量 Number of workbenches | 2pcs | 2pcs | 2pcs |
| 轴向传动方式 Axial transmission mode | 直传式 | 直传式 | 直传式 |
| 切削速度 Cutting speed | 1-10000mm/min | 1-10000mm/min | 1-10000mm/min |
| 快移速度 X/Y/Z Fast moving speed X/Y/Z | 24/24/24m/min | 24/24/24m/min | 24/24/24m/min |
| 刀库容量 Cutter Storage Capacity | 24(40/60) | 40(60) | 40(60) |
| 选刀方式 Tool selection method | 随机 | 随机 | 随机 |
| 刀具交换方式 Tool Exchange Mode | 刀臂式 | 刀臂式 | 刀臂式 |
| 刀具重量 Maximum tool weight | 20kg | 25kg | 25kg |
| 刀具长度 Maximum tool length | 450mm | 500mm | 600mm |
| 刀具直径(无邻刀）Maximum Tool Diameter (No Neighboring Tool) | cl) 105/200 | 0 125/225 | 0 125/225 |
| 刀柄规格 Tool handle specification | BT50/CAT50/DIN50 | BT50/CAT50/DIN50 | BT50/CAT50/DIN50 |
| 机床定位精度 Location Accuracy | 0.008mm | 0.008mm | 0.008mm |
| 机床重复定精度 Machine Tool Repeated Precision | 0.006mm | 0.006mm | 0.006mm |
| 所需气压 P「essu「e「equi「ed | 6-8MPa | 6-8MPa | 6-8MPa |
| 电压需求 Voltage requirements | 45KVA | 70KVA | 70KVA |
| 水箱容量 Water tank capacity | 700L | 800L | 800L |
| 机器重量 Machine weight | 15000kg | 20000kg | 22000kg |
机床商务网