钨镍铁高比重合金圆柱 密度18g/cm³ 返回列表页

钨镍铁高比重合金圆柱产品详情：

1）比重大：一般比重为16.5-18.75g/cm3；
2）强度高：抗拉强度为700-1000Mpa；
3）吸收射线能力强：比铅高30-40%；
4）导热系数大：钨合金的导热系数为模具钢的5倍；
5）热膨胀系数小：只有铁或钢的1/2-1/3，
6）良好的可导电性能；无因为其良好的导电性能而广泛应照明和电焊行业
7）具有良好的可焊性和加工性。

8）株洲精钻可按您的要求生产各种形状、尺寸规格高比重合金。

钨镍铁高比重合金圆柱具有高密度，高熔点，体积小，高耐磨性，硬度，高抗拉强度，高延伸性,耐高温等许多优良的特性。钨合金产品广泛应工业领域。
Tungsten alloy rod has so many advantages, such as high density, high melting point, small
volume, excellent hardness, superior wearing resistance, high ultimate tensile strength, high
ductility, high temperature resistance, etc. Tungsten alloys are widely used in many industrial
sectors.

 什么是钨合金棒？

What is Tungsten Alloy Rod?
钨合金棒的制作流程是首先将钨粉末和其他金属粉末混合，压制，而后烧结成毛坯状半成品，
毛坯状半成品经过旋锻和切削加工之后，*后制成钨合金棒。这些钨合金棒可根据客户需求制作成任意长度的，表面是光滑的，直径在3mm 以上。中空的管壁是3mm 以内。钨合金
棒可以加工成中空状的。特殊的长度以及结构可根据客户的需求进行加工。
Tungsten alloy rod is produced by mixing and pressing tungsten and other metal powders and
sintering them into semi-product billets, which is worked by rolling or swaging into rod. It can beproduced into any lengths as per requirement of customer with a smooth surface at diameters morethan 3mm, and diameter of hollow tube wall is below 3mm. Tungsten alloy rod can be machinedinto hollow type. Specific lengths and special fabrications can be supplied upon request.