机床商务网
详细介绍
日本PEACOCK杠杆百分表／千分表
制 造 商： 孔雀(PEACOCK)
产品种类： 工业测量仪器
所属行业： 电子及电路板工业
模具及五金制造行业
制 造 商： 孔雀(PEACOCK)
产品种类： 工业测量仪器
所属行业： 电子及电路板工业
模具及五金制造行业
| The New Pic Test is a lever type dial indicators used in all over the world. It is a measuring instrument used for measurements of restricted areas,ａnd the outside/ inside, groove width and centering with the dial gauge installed to the lathe or the milling cutting machine for measurements with the gauges held on the height gauges. | |||||||||||||||||||||||||||
 Without change lever (Automatic inverse type)The lever type dial gauge of this type has no change lever, the contact point inverses automatically in normal or reverse direction as desired and pointer turns always CW to improve the measuring efficiency. Miniature Bearing UsedThe miniature bearing used as a bearing at the pivot of the contact point to show good indication stability without any effect by rod play. O-ring usedOil resistance is enhanced by seating the O-ring in the turning sectionof the outer frame. | |||||||||||||||||||||||||||
 Without change lever PCN series | |||||||||||||||||||||||||||
 Small dial face (Ø29) |
 |
 |
Long contact point(L = 42.8mm)  | ||||||||||||||||||||||||
 |
 |
High accuracy | |||||||||||||||||||||||||
Wide measuring rangeShort pointer is available |
Wide measuring rangeShort pointer is available | ||||||||||||||||||||||||||
| Without change lever PCN series (Vertical) | |||||||||||||
 |
 | ||||||||||||
| Specifications | |||||||||
| Model | Graduation (mm) | Range (mm) | Reading | Accuracy (µm) | Measuring force less than (N) | ||||
| Wide-range forward accuracy | Adjacent error | Backward error | |||||||
| PCN-0 | 0.01 | 0.5 | 0 - 25 - 0 | 5 | 5 | 3 | 0.3 | ||
| PCN-1A | 0.01 | 0.5 | 0 - 25 - 0 | 5 | 5 | 3 | 0.3 | ||
| PCN-1B | 0.01 | 0.8 | 0 - 40 - 0 | 8 | 5 | 3 | 0.3 | ||
| PCN-1L | 0.01 | 1.0 | 0 - 50 - 0 | 10 | 5 | 4 | 0.3 | ||
| PCN-2 | 0.002 | 0.28 | 0 - 140 - 0 | 3 | 2 | 2 | 0.3 | ||
| PCN-2B | 0.002 | 0.2 | 0 - 100 - 0 | 3 | 2 | 2 | 0.3 | ||
| PCN-S | 0.001 | 0.14 | 0 - 70 - 0 | 3 | 2 | 2 | 0.3 | ||
| PCN-7A | 0.01 | 1.5 | 0 - 25 - 0 | 8 | 5 | 3 | 0.3 | ||
| PCN-7C | 0.002 | 0.6 | 0 - 100 - 0 | 6 | 2 | 3 | 0.3 | ||
| PCN-5 | 0.01 | 0.5 | 0 - 25 - 0 | 5 | 5 | 3 | 0.3 | ||
| PCN-6 | 0.002 | 0.28 | 0 - 140 - 0 | 3 | 2 | 2 | 0.3 | ||
| |||||||||
 |
 | ||||||||||||||||||||||
 | |||||||||||||||||||||||
| 型 式 | 目量 | 测定范围 | 目盛板 | 面径 | 测定力 |
| PCN-0 | 0.01 | 0.5 | 0-25-0 | 29 | 0.3N以下 |
| PCN-1AD | 0.01 | 0.5 | 0-25-0 | 46.5 | |
| PCN-1A | 0.01 | 0.5 | 0-25-0 | 35 | |
| PCN-1B | 0.01 | 0.8 | 0-40-0 | ||
| PCN-1L | 0.01 | 1.0 | 0-50-0 | ||
| PCN-1LD | 0.01 | 1.0 | 0-50-0 | 46.5 | |
| PCN-2 | 0.002 | 0.28 | 0-140-0 | 35 | |
| PCN-2B | 0.002 | 0.2 | 0-100-0 | ||
| PCN-2BD | 0.002 | 0.2 | 0-100-0 | 46.5 | |
| PCN-S | 0.001 | 0.14 | 0-70-0 | 35 | |
| PCN-SD | 0.001 | 0.2 | 0-100-0 | 46.5 | |
| PCN-7A | 0.01 | 1.5 | 0-25-0 | 35 | |
| PCN-7C | 0.002 | 0.6 | 0-100-0 | ||
| PCN-5 | 0.01 | 0.5 | 0-25-0 | ||
| PCN-6 | 0.002 | 0.28 | 0-140-0 |
机床商务网