● 用于铝型材端面的铣削加工，以适应不同截面型材的配合。
● 可一次铣削多根型材，不同型材调节简便、快捷，生产效率高。
● 配备立刀装置，实现加强中梃铣削；电机倒立安装，防止进水。
● 采用欧式喷雾装置，每个喷雾可单独使用、也可同时使用。
● 德国太敬滑动单元，亚德客二联体、电磁阀；法国施耐德电器。
● 电机上下调整行程可达150mm，前后调整行程可达100mm。
● It is used for milling the end face of aluminum profile to fit different section profiles.
● It can mill several profiles at one time, and adjust different profiles easily and quickly.
● Install/motor adopt handstand, preventing the motor into the water.
● The machine is equipped with cutter device, which can realize diversification to strengthen ting milling.
● According to the diversity of profiles, the machine can adjust is simple, fast, and high work efficiency.
● It adopts European spray device, each spray can be used alone, also can be used at the same time.
● Sliding unit, two conjoined, solenoid valve adopts the Germany, appliances using France schneider.
● Adjustment can travel up and down 150mm/motor, before and after the adjustment can travel 100mm.
机床商务网