机床商务网
详细介绍
QC11K数控液压闸式剪板机
产品特点:
1.机架采用有限元分析设计，钢板整体焊接结构，有很好的刚性和稳定性。
2.机架采用大型数控镗铣床整体加工，保证剪切精度和质量。
3.刀架采用滚动导轮支撑，消除剪切间隙，提高剪切精度。
4.采用四刃剪刀，大大提高剪刀使用寿命。
5.刃口间隙手轮调节，刻度盘显示，调整简单、直观、准确。
6.剪切行程可无级调节，以提高剪切效率。
7.采用串联式油缸同步系统，蓄能缸回程，工作平稳可靠。
8.标配ESTUN21S剪板机数控系统，精度高，简单易用。
QC11K数控液压闸式剪板机
QC11Y Series Hydraulic guillotine beam shearing machine | |||||||
Specification | Shearing thickness (mm) | Shearing width （mm） | Strokes mm-1 | Backguage range (mm) | Shearing angler (°) | Workbench height （mm） | Main power （kw） |
QC11Y/K -6*2500 | 6 | 2500 | 10-35 | 20-600 | 1°30′ | 800 | 7.5 |
QC11Y/K -6*3200 | 6 | 3200 | 8-35 | 20-600 | 1°30′ | 800 | 7.5 |
QC11Y/K -6*4000 | 6 | 4000 | 7-35 | 20-600 | 1°30′ | 800 | 7.5 |
QC11Y/K -6*5000 | 6 | 5000 | 6-25 | 20-800 | 1°30′ | 900 | 11 |
QC11Y/K -6*6000 | 6 | 6000 | 5-25 | 20-800 | 1°30′ | 1000 | 11 |
QC11Y/K -8*2500 | 8 | 2500 | 10-35 | 20-600 | 1°30′ | 800 | 7.5 |
QC11Y/K -8*3200 | 8 | 3200 | 8-35 | 20-600 | 1°30′ | 900 | 7.5 |
QC11Y/K -8*4000 | 8 | 4000 | 7-35 | 20-600 | 1°30′ | 1000 | 15 |
QC11Y/K -8*5000 | 8 | 5000 | 6-25 | 20-800 | 0.5-2° | 1050 | 15 |
QC11Y/K -8*6000 | 8 | 6000 | 5-25 | 20-800 | 0.5-2° | 840 | 15 |
QC11Y/K -12*2500 | 12 | 2500 | 10-35 | 20-800 | 0.5-2.5° | 900 | 15 |
QC11Y/K -12*3200 | 12 | 3200 | 6-20 | 20-800 | 0.5-2.5° | 940 | 15 |
QC11Y/K -12*4000 | 12 | 4000 | 6-20 | 20-800 | 0.5-2.5° | 1000 | 15 |
QC11Y/K -12*5000 | 12 | 5000 | 5-15 | 20-800 | 0.5-2.5° | 1060 | 30 |
QC11Y/K -12*6000 | 12 | 6000 | 6-15 | 20-800 | 0.5-2.5° | 840 | 18.5 |
QC11Y/K -16*3200 | 16 | 3200 | 7-30 | 20-800 | 2°30′ | 900 | 30 |
QC11Y/K -16*4000 | 16 | 4000 | 6-30 | 20-800 | 2°30′ | 950 | 30 |
QC11Y/K -16*5000 | 16 | 5000 | 6-15 | 20-800 | 2°30′ | 1100 | 30 |
QC11Y/K -16*6000 | 16 | 6000 | 5-15 | 20-800 | 0.5-2.5° | 1100 | 37 |
QC11Y/K -20*2500 | 20 | 2500 | 9-30 | 20-1000 | 0.5-2.5° | 900 | 30 |
QC11Y/K -20*3200 | 20 | 3200 | 7-30 | 20-1000 | 0.5-3° | 950 | 30 |
QC11Y/K -20*4000 | 20 | 4000 | 6-30 | 20-1000 | 0.5-3° | 1100 | 30 |
QC11Y/K -20*5000 | 20 | 5000 | 5-30 | 20-1000 | 0.5-3° | 1100 | 37 |
QC11Y/K -20*6000 | 20 | 6000 | 5-15 | 20-1000 | 3° | 1200 | 45 |
QC11Y/K -25*2500 | 25 | 2500 | 5-25 | 20-1000 | 3° | 900 | 37 |
QC11Y/K -25*3200 | 25 | 3200 | 4-25 | 20-1000 | 0.5-3.5° | 950 | 37 |
QC11Y/K -25*4000 | 25 | 4000 | 3-20 | 20-1000 | 0.5-3.5° | 1100 | 37 |
QC11Y/K -32*2500 | 32 | 2500 | 4-12 | 20-1000 | 0.5-3.5° | 1000 | 55 |
QC11Y/K -32*3200 | 32 | 3200 | 4-12 | 20-1000 | 0.5-3.5° | 1100 | 55 |
QC11Y/K -40*2500 | 40 | 2500 | 3-10 | 20-1000 | 0.5-3.5° | 1200 | 60 |
QC11Y/K -40*3200 | 40 | 3200 | 3-10 | 20-1000 | 0.5-4° | 1200 | 60 |
Because in the continuous improvement of products, if there is difference between this date and technical data, should comply with the technical agreement parameters on both sides. No further notice! | |||||||
机床商务网