1756-IN16/ABPLC模块

1756-IN16/ABPLC模块

为实现液位的手动/自动控制，需要输入口12点，输出口8点，选用C20P 20点I/O单元的PLC，输入光电隔离，输出继电器隔离，负载能力强；液位检测采用干簧管传感器，手动/自动转换、运行/试验转换和液位设定采用双位旋钮，手动启泵、停泵和确认、试验采用常开按钮；输出选用电子音响报警器和24V直流指示灯、继电器。参见图一系统硬件配置图。

为节省输入口数量，节省投资，本系统运行/试验功能的转换采用了对I/O模块接线的优化，使PLC输入模块中1个输入节点起到2个输入节点的作用，完成PLC工作在两种方式下的I/O功能。参见图二I/O模块接线的优化。

1756-IN16/ABPLC模块

 1756-IB32 VDC INPUT 32PTS
 1756-IC16 VDC INPUT 16PTS
 1756-IF16 ANALOG INPUT-CURRENT/VOLTAGE 16PTS
 1756-IF6I ISOLATED ANALOG INPUT-CURRENT/VOLTAGE 6PTS
 1756-IF8 ANALOG INPUT-CURRENT/VOLTAGE 8PTS
 1756-IH16I VDC ISOLOTED INPUT 16PTS
 1756-IM16I VAC ISOLATED INPUT 16PTS
 1756-IN16 VAC INPUT 16 PTS
 1756-IR6I ISOLATED RTD INPUT 6PTS
 1756-IT6I ISOLATED THERMOCOUPLE/MV INPUT 6PTS
 1756-IV16 VDC SOURCING INPUT 16PTS
 1756-L1 LOGIX5550 PROCESSOR, 64KBYTE USER MEMORY
 1756-L1K CONFORMALLY COATED LOGIX 5550 PROCESSOR W/160KBYTE BASE MEMORY
 1756-L1M1 LOGIX5550 PROCESSOR, 512KBYTE USER MEMORY
 1756-L1M1K CONFORMALLY COATED LOGIX 5550 PROCESSOR W/512KBYTE BASE MEMORY
 1756-L1M2 LOGIX5550 PROCESSOR W/ 1M BYTE EXPANSION MEMORY
 1756-L1M2K CONFORMALLY COATED LOGIX5550 PROCESSPR W/1MBYTE EXPANSION MEMORY
 1756-L1M3 LOGIX5550 PROCESSOR WITH 2MBYTE EXPANSION MEMORY
 1756-L1M3K CONFORMALLY COATED LOGIX5550 PROCESSPR W/2MBYTE EXPANSION MEMORY
 1756-M02AE 2-AXIS MOTION MODULE
 1756-M08SE 1756 8 AXIS SERCOS SERVO MODULE
 1756-M1 LOGIX5550 512KBYTE EXPANSION MEMORY
 1756-M1K CONFORMALLY COATED LOGIX5550 EXPANSION MEMORY
 1756-M2 LOGIX5550 1MBYTE EXPANSION MEMORY
 1756-M2K CONFORMALLY COATED LOGIX5550 EXPANSION MEMORY
 1756-M3 LOGIX5550 2MBYTE EXPANSION MEMORY
 1756-M3K CONFORMALLY COATED LOGIX5550 EXPANSION MEMORY
 1756-MVI CLX MULTI VEND INTF
 1756-MVID MULTI-VENDR INTF DEV KIT
 1756-N2 EMPTY SLOT FILLER CARD
 1756-OA16 74-265 VAC OUTPUT 16PTS
 1756-OA16I 74-265 VAC ISOLATED OUTPUT 16PTS
 1756-OA8 74-265 VAC 2 AMP OUTPUT 8PTS
 1756-OA8D 74-132 VAC DIAGNOSTIC OUTPUT 8PTS