1756-L1M2K /ABPLC模块

 1756-L1M2K /ABPLC模块

因为输出部分控制的负载多为感性负载，为此选用固态继电器进行功率放大。但在电路中未加设二极管保护和过压吸收电路；仅在发电机回路中加装了过压吸收保护电路。

        系统需要用DC24V供电，而机车电源为DC110V。因此需要一个将DC110V转换为DC24V的开关电源。在改造过程中选用了由四方机车车辆厂设计制造的开关电源。该电源有较宽的输入范围（DC30V—DC135V），既能满足柴油机起动时蓄电池压降大的需要，又不至于电压失调时的过压冲击。

 1756-L1M2K /ABPLC模块

 1756-IB32 VDC INPUT 32PTS
 1756-IC16 VDC INPUT 16PTS
 1756-IF16 ANALOG INPUT-CURRENT/VOLTAGE 16PTS
 1756-IF6I ISOLATED ANALOG INPUT-CURRENT/VOLTAGE 6PTS
 1756-IF8 ANALOG INPUT-CURRENT/VOLTAGE 8PTS
 1756-IH16I VDC ISOLOTED INPUT 16PTS
 1756-IM16I VAC ISOLATED INPUT 16PTS
 1756-IN16 VAC INPUT 16 PTS
 1756-IR6I ISOLATED RTD INPUT 6PTS
 1756-IT6I ISOLATED THERMOCOUPLE/MV INPUT 6PTS
 1756-IV16 VDC SOURCING INPUT 16PTS
 1756-L1 LOGIX5550 PROCESSOR, 64KBYTE USER MEMORY
 1756-L1K CONFORMALLY COATED LOGIX 5550 PROCESSOR W/160KBYTE BASE MEMORY
 1756-L1M1 LOGIX5550 PROCESSOR, 512KBYTE USER MEMORY
 1756-L1M1K CONFORMALLY COATED LOGIX 5550 PROCESSOR W/512KBYTE BASE MEMORY
 1756-L1M2 LOGIX5550 PROCESSOR W/ 1M BYTE EXPANSION MEMORY
 1756-L1M2K CONFORMALLY COATED LOGIX5550 PROCESSPR W/1MBYTE EXPANSION MEMORY
 1756-L1M3 LOGIX5550 PROCESSOR WITH 2MBYTE EXPANSION MEMORY
 1756-L1M3K CONFORMALLY COATED LOGIX5550 PROCESSPR W/2MBYTE EXPANSION MEMORY
 1756-M02AE 2-AXIS MOTION MODULE
 1756-M08SE 1756 8 AXIS SERCOS SERVO MODULE
 1756-M1 LOGIX5550 512KBYTE EXPANSION MEMORY
 1756-M1K CONFORMALLY COATED LOGIX5550 EXPANSION MEMORY
 1756-M2 LOGIX5550 1MBYTE EXPANSION MEMORY
 1756-M2K CONFORMALLY COATED LOGIX5550 EXPANSION MEMORY
 1756-M3 LOGIX5550 2MBYTE EXPANSION MEMORY
 1756-M3K CONFORMALLY COATED LOGIX5550 EXPANSION MEMORY
 1756-MVI CLX MULTI VEND INTF
 1756-MVID MULTI-VENDR INTF DEV KIT
 1756-N2 EMPTY SLOT FILLER CARD
 1756-OA16 74-265 VAC OUTPUT 16PTS
 1756-OA16I 74-265 VAC ISOLATED OUTPUT 16PTS
 1756-OA8 74-265 VAC 2 AMP OUTPUT 8PTS
 1756-OA8D 74-132 VAC DIAGNOSTIC OUTPUT 8PTS