3KL 中空立式夹盘

3KL 中空立式夹盘⋅ 适合在钻床、铣床、加工中心上使用。⋅ 安装简单：单个安装只需配T型螺钉即可。⋅ 群组安装：将数个夹盘安装于固定板上即可快速换模。⋅ 软爪、硬爪可替换，节省成本。⋅ Suitable for drilling，milling and Machining，center.⋅ Simple installation:Asingle installation requires only-type screw⋅ Group to Install:Install a number of chuck plates on the plate, You can quickly replactit.⋅ Soft jaw and hardened jaw can be replaced to save cost. -->

产品参数

尺寸图 Size Fig

 

尺寸参数 Dimensions(mm)

规格 Spec	A	B	C	D(H7)	D1	E	F	G	H	I	Q	L	N(H7)	P
型号 Model
3KL-05	158	135	28	50	140	111	142	12	62	14	5	9	10	25
3KL-06	178	169	40	60	160	138	175	14	73	20	5	11	10	31
3KL-08	210	210	45	80	190	158	196	16	95	25	5	13	10	35
3KL-10	250	254	70	90	230	186	229	18	100	30	6	13	12	40
3KL-12	266	304	82	90	246	200	251	18	130	30	6	13	12	50

 

性能参数 Specifications

规格 Spec	活塞面积 Eff. piston area (cm²)	活塞行程 piston stroke (mm)	爪行程(直径) Jaw stroke(mm)	大夹紧力 Max. Gripping force KN(kgf)	大使用压力 Max. pressure MPa(kgf/cm²)	夹紧范围 Gripping range(mm)	重量 Weight(kg)
型号 Model
3KL-05	46.7	10	5.4	35.8(3650)	3.7(37)	7-135	12
3KL-06	60.4	12	5.5	56.8(5800)	3.6(36)	12-168	20
3KL-08	98	16	7.4	85.8(8750)	3.6(36)	15-210	34
3KL-10	128.6	19	8.8	110.7(11300)	3.4(34)	31-254	56
3KL-12	155.3	23	10.6	143.6(14650)	3.6(36)	34-304	80

注：二爪立式夹盘的大油压力应为三爪同规格所标大油压力的三分之二。

The maximum oil pressure of the two-claw vertical chuck should be two thirds of the maximum oil pressure of the three claws.