半切顶齿轮滚刀

使用本滚刀可以使齿轮齿形和齿顶倒角同时切出。

订货时请提供下列参数：

1）模数或径节m or D.P.

2)压力角P.A.

3)被加工齿轮齿数Z，通常采用Z=35

4）齿轮倒角量，通常采用圆周方向C=0.08m;半径方向f=0.1m特殊要求可另行设计。

This kind of hobs can cut out gear tooth profile and tip relief simultaneously.When ordering, please offer date as follows:

1) Module or diametral pitch m or D.P.

2) Pressure angle P.A.

3) Teeth of gear manufactured Z, in usual condition Z=35.

4) Chamfer amount of gear, Usually C=0.08m along circle. f=0.10m along radius.Special request can be taken to design.