详细介绍
湖州法拿克MV-1370高速立式加工中心采用中国台湾进口光机,零部件均采用米汉纳铸件,为了机床长时间加工,在不停机的情况下发生变形,铸件均做*的淬火处理,三年失效处理,有利消除铸件内应力,同时铸件结构采用一体成型技术,箱体结构。MV-1370高速立式加工中心加工上采用大型五面加工机,加工完成。
MV-1370参数详情:
工作台尺寸mm | pallet size | 1400*700 |
左右行程(x)mm | x axis travel | 1300 |
前后行程(y)mm | y axis travel | 700 |
上下行程(z)mm | z axis travel | 650 |
主轴中心至立柱导轨距离mm | distance from spindle center to column guide | 785 |
主轴端面至工作台面距离mm | distance from spindle nose to table | 150-800 |
工作台t 型槽 | t-type tank | 5-18*152.5 |
主轴刀柄 | type of taper hole | bt50 |
主轴转速(rpm) | max spindle speed | 8000 |
主轴马达功率(kw) | spindle power | 11/15 |
x.y.z轴伺服电机(kw) | three-axis servo power motor | 4/4/4 |
x.y.z电机联接方式 | three-axis motor coupling | 直联(direct torque motor) |
x、y、z轴导轨方式 | three-axis rail way | 滑轨(slide-rail) |
工作台zui大荷重(kg) | max.weight on pallet | 1000 |
换刀速度sec | tool changing time(tool-to-tool) | 2.5 |
选刀方式 | tool selection mode | 就近任选(the nearest) |
刀库容量(把) | tool storage capacity | 24(圆盘式)/(turntable) |
zui大*重量kg | max.tool weight | 20 |
zui大*长度mm | max.tool length | 350 |
zui大*直径mm | max.tool diameter | 相邻φ150不相邻φ250 |
xyz快移速度m/min | rapid traverse rate | 15/15/12 |
切削进给速度m/min | cutting feed speed | 8 |
xyz定位精度mm | positioning precision | ±0.01/±0.008/±0.008 |
xyz重复定位精度mm | repeatability | ±0.005/±0.004/±0.004 |
机器外形 (l×w×h) | l*w*h | 3800×3010×3100 |
机床总重(t) | weight | 9.5 |