详细介绍
冲床性能特点
J23系列压力机是普通型开式可倾冲床,其结构简单,操作方便,性能可靠,可采用刚性转键式离合器,使用维修方便;
可装有紧急制动装置,可以使滑块急停在0-135度范围内,并可配置光电保护器;
其中J23-100B、J23-125采用铸铁机身,曲轴纵置,偏心套结构形成可调,气动摩擦离合器,工作平稳,冲击小,可以使滑块停在任何位置。
Features:
1.J23 series are general open- tilting power press with simple strcture, reliable
performance and easy operation J23 can adopt rigid turn key clutch;
2.So,it is convenient for operation and maintenance. J23 can also adopt emergency
stop device to make the slider block suddenly stop on the range of 0 ~135 and
the photoelectrical protector device is optional;
3.J23 100B and J23 125 are specially among the J23 series. Their main body is
cast in iron. The cranked axie is setlled Vertically. Ecoentric sleeve makes easy
adjustment And there is also pneumatic friction clutch.Therefore J23-100Band
J23-125 enable to work with dmall impact and sationarity and make slider block
stop at any position
冲床技术参数 Technical Parameters
| J23-6.3 | J23-10 | J23-16 | J23-25 | J23-40 | J23-40A | J23-63T | J23-80 | J23-100 | ||||
工称压力(KN) | 63 | 100 | 160 | 250 | 400 | 400 | 630 | 800 | 1000 | ||||
滑块行程(mm) | 55 | 60 | 70 | 70 | 100 | 120 | 120 | 120 | 130 | ||||
行程次数 (min-1) | 170 | 145 | 120 | 55 | 50 | 55 | 50 | 50 | 50 | ||||
zui大封闭高度(mm) | 170 | 180 | 220 | 250 | 320 | 300 | 370 | 380 | 420 | ||||
封闭高度 调节量(mm) | 30 | 35 | 50 | 60 | 60 | 80 | 80 | 80 | 100 | ||||
滑块中心至机身距离(mm) | 110 | 130 | 160 | 210 | 205 | 250 | 260 | 285 | 300 | ||||
垫板厚度(mm) | 40 | 40 | 40 | 50 | 60 | 80 | 90 | 90 | 100 | ||||
立柱间距离 | 150 | 180 | 220 | 260 | 300 | 300 | 350 | 350 | 400 | ||||
工作台尺寸 | 前后(mm) | 200 | 240 | 300 | 400 | 380 | 480 | 480 | 560 | 580 | |||
左右(mm) | 310 | 370 | 450 | 600 | 610 | 710 | 710 | 780 | 950 | ||||
工作台孔尺寸 | 前后(mm) | 110 | 160 | 160 | 130 | 200 | 150 | 200 | 200 | 200 | |||
左右(mm) | 160 | 200 | 240 | 260 | 290 | 300 | 340 | 340 | 340 | ||||
直径(mm) | 140 | 170 | 210 | 180 | 260 | 200 | 250 | 250 | 250 | ||||
滑块底面尺寸 | 前后(mm) | 120 | 150 | 180 | 200 | 200 | 270 | 250 | 250 | 320 | |||
左右(mm) | 140 | 170 | 200 | 250 | 250 | 320 | 320 | 320 | 400 | ||||
模柄孔尺寸 | 直径(mm) | 30 | 30 | 40 | 50 | 50 | 50 | 50 | 60 | 60 | |||
深度 (mm) | 55 | 55 | 60 | 70 | 70 | 70 | 80 | 80 | 80 | ||||
外形 尺寸 | 前后(mm) | 780 | 895 | 1130 | 1325 | 1740 | 1600 | 1810 | 1920 | 2100 | |||
左右(mm) | 600 | 713 | 834 | 990 | 1040 | 1180 | 1350 | 1350 | 1650 | ||||
高 (mm) | 1537 | 1668 | 1910 | 2140 | 2100 | 2310 | 2800 | 2690 | 2950 | ||||
倾斜角(°) | 45 | 35 | 35 | 30 | 20 | 20 | 30 | 30 | 30 | ||||
电机功率(kw) | 0.75 | 1.1 | 1.5 | 2.2 | 4 | 4 | 5.5 | 7.5 | 7.5 |
注:本资料所列数据为参考数据,如与机床实际不符,应以机床实际数据为准,本公司保留对资料的zui终解释权!