机床商务网
详细介绍
平面磨床
| 规格 standards | 单位 unit | GTS-306AH | GTS-306AH＊ | GTS-306AHD | GTS-306MSI | ||
| 能力 capacity | 工作台工作面积available area of working table | mm | 600＊300 | 600＊300 | 600＊300 | 600＊300 | |
| 左右zui大移动量 maximum moving dimension from left to right | mm | 660 | 660 | 660 | 660 | ||
| 前后zui大移动量maximum moving dimension from front to back | 不装大墙板 | mm | 370 | 370 | 370 | 370 | |
| 装大墙板 | 340 | 340 | 340 | 340 | |||
| 工作台面至主轴中心zui大距离maximum distance from surface of working table to spindle | mm | 540 | 540 | 540 | 540 | ||
| 工作台zui大承受重量maximum bearing weightof working table | Kgs | 420 | 420 | 420 | 420 | ||
工作台working table | 工作台T型槽slot in working table | mmxN | 14＊1 | 14＊1 | 14＊1 | 14＊1 | |
| 工作台速度speed of working table | m/min | 5-23 | 5-23 | 5-23 | 5-23 | ||
工作台轨道 | m/min | -V-平滑动导航 | -V-平滑动导航 | -V-平滑动导航 | -V-平滑动导航 | ||
前后手轮进刀fornt & rea handwheel feed | 一格a check | mm | 0.02 | 0.02 | 0.02 | 0.02 | |
1圈a circle | mm | 4 | 4 | 4 | 4 | ||
前后自动进给auto-supplying from front to back | mm | 0.1＊8 | 0.1＊8 | 0.1＊8 | 0.1＊8 | ||
前后快速移动high speed moving from front to back | 50HZ | mm | 820 | 820 | 820 | 820 | |
60HZ | mm | 980 | 980 | 980 | 980 | ||
砂轮grinding wheel | 砂轮尺寸 measurement of grinding wheel | mm | 355＊(20-40)＊127 | 355＊(20-40)＊127 | 355＊(20-40)＊127 | 355＊(20-40)＊127 | |
主轴转速 rotational speed of spindle | 50HZ | R.p.m | 1450 | 1450 | 1450 | 1450 | |
60HZ | R.p.m | 1740 | 1740 | 1740 | 1740 | ||
上下结构up and down structure | zui大移动量maximum moving dimension | mm | 432 | 432 | 432 | 432 | |
上下手轮进刀up& down handwheel feed | 一格a check | mm | 0.01 | 0.01 | 0.01 | 0.01 | |
1回转a turing round | mm | 2 | 2 | 2 | 2 | ||
自动进给量auto-supplying volumn | mm | / | / | 0.001-0.04 | 0.001-0.04 | ||
上下快速移动量 high-speed moving dimension from up to down | m/min | / | / | 130 | 130 | ||
马达motor | 主轴马达spindle motor | HXP | 5＊4 | 5＊4 | 5＊4 | 5＊4 | |
上下驱动马达 up and down driving motor | w | / | / | / | / | ||
油压马达oil pressure motor | HXP | 2＊4 | 2＊4 | 2＊4 | 2＊4 | ||
吸尘马达dust catching motor | HXP | 1/2＊2 | 1/2＊2 | 1/2＊2 | 1/2＊2 | ||
冲水马达dust catching motor | HXP | 1/8＊2 | 1/8＊2 | 1/8＊2 | 1/8＊2 | ||
前后驱动马达back and front driving motor | w | / | 80 | 400 | 400 | ||
尺寸dimension | 机器高度machine height | mm | 1900 | 1900 | 1900 | 1900 | |
占地面积 covering area | mm | 2200＊3050 | 2200＊3050 | 2200＊3050 | 2200＊3050 | ||
净重 net weight | kgs | 1750 | 1750 | 1750 | 1750 | ||
毛重 gross weight | kgs | 1950 | 1950 | 1950 | 1950 | ||
AHR:前后/左右/上下快动 HAD:前后/左右/上下自动 MSI:左右油压自动/前后.上下自动(带手持编码器)
设计若有变更,恕不另行通知.
机床商务网