您现在的位置:机床商务网>新闻首页>展会快报

CCMT2024展馆交通指南

2024年04月06日 10:42:29来源:中国机床工具工业协会cmtba点击:3645

  【机床商务网栏目 展会快报】CCMT2024(第十三届中国数控机床展览会)将于2024年4月8-12日在上海浦东 上海新国际博览中心(以下简称博览中心)举办,请广大展商和观众提前规划好交通路线,以便顺利抵达展馆。展会主承办方倡导大家绿色观展,优先选乘公交、地铁出行。
 
  一、公共交通
 
  1.地铁
 
  (1)地铁7号线→博览中心:乘坐地铁7号线,花木路站下车,步行100米至博览中心。
 
  (2)其他地铁线路→博览中心:乘坐地铁2号线、16号线、18号线或其他地铁线路,到龙阳路站下车,步行1100米至博览中心,或换乘地铁7号线花木路站下车,步行100米至博览中心。
 
  2.公交线路
 
  请通过手机地图导航软件搜索:上海新国际博览中心(1/2/3号入口大厅),方便您实时选择最优线路。
 
  3.机场→博览中心
 
  (1)浦东国际机场→博览中心:乘坐地铁2号线(徐泾东方向或淞虹路方向),龙阳路站下车;或乘坐磁悬浮列车(龙阳路站方向),龙阳路站下车,步行1100米至博览中心,或换乘地铁7号线花木路站下车,步行100米至博览中心。
 
  (2)虹桥机场→博览中心:乘坐地铁2号线(浦东国际机场方向或广兰路方向),龙阳路站下车,步行1100米至博览中心,或换乘地铁7号线花木路站下车,步行100米至博览中心。
 
  4.火车站→博览中心
 
  (1)上海火车站→博览中心:乘坐地铁1号线(莘庄方向),人民广场站下车,换乘地铁2号线(浦东国际机场方向或广兰路方向),龙阳路站下车,步行1100米至博览中心,或换乘地铁7号线花木路站下车,步行100米至博览中心。
 
  (2)上海南站→博览中心:乘坐地铁1号线(富锦路方向),上海体育馆站下车,换乘地铁4号线外圈,东安路站下车,换乘地铁7号线花木路站下车,步行100米至博览中心。
 
  (3)虹桥火车站→博览中心:乘坐地铁2号线(浦东国际机场方向或广兰路方向),龙阳路站下车,步行1100米至博览中心,或换乘地铁7号线花木路站下车,步行100米至博览中心。
 
  二、出租车/网约车→博览中心
 
  展馆3号入口广场设立了出租车乘客上下车点,乘坐出租车和网约车的观众可在此上下车,下车后可直接抵达展馆。
 
  三、自驾车→博览中心
 
  请通过手机地图导航软件搜索:上海新国际博览中心P1立体停车场,即可抵达,方便您实时选择最优线路,下车后可直接抵达展馆。
 
  说明:
 
  1.上海市道路法规规定:外地牌照小客车工作日上午7:00-9:00,下午17:00-19:00禁止驶入内环区域,工作日7:00-20:00禁止驶入高架及隧道等道路,具体要求请按照属地交管部门要求执行。
 
  2.以上公共交通线路及自驾车线路介绍仅供参考,请在网上查询实时路线或拨打市民服务热线12345,进行公交线路查询确认,以便掌握最新情况。
 
  四、展馆停车场
 
  根据展馆规定和安排,展馆内外设多个停车场供自驾车和大型车辆停泊:
 
  1. P1停车场是立体停车场,可停2400辆小型车;
 
  2. P2停车场是立体停车场,可停700辆小型车;
 
  3. P4停车场可停140辆小型车;
 
  4. P5停车场可停460辆小型车;
 
  5. P6停车场可停60辆小型车。
 
  小型车停车收费标准8元/小时,封顶64元/天。
 
  大型车持“临时通行证”从展馆7号门进,北侧道路下客后至5号门驶离;持“停车证”按路线指引在P3、P7停车场停车。
 

 


 
CCMT2024交通指示图
 
  
 
  来源:中国机床工具工业协会
 
  
 
  Traffic Guide
 
  Public Transportation (Shanghai New International Expo Centre/abbreviated as Expo Centre)
 
  1. Subway
 
  1)Subway Line7→Expo Centre: Get off at Huamu Road Station of Subway Line7, walk 100 meters to Expo Centre
 
  2) Other Subway Lines→Expo Centre:Get off at Longyang Road Station of Subway Line2, Line16, Line18 or others,and then walk 1100 meters to Expo Centre, or transfer Subway Line7 to arrive at Huamu Road Station, walk 100 meters to Expo Centre.
 
  2. Bus
 
  Please search through mobile map navigation software: Shanghai New International Expo Centre (Entrance Hall 1/2/3), select the best route in real time.
 
  3. Airport→Expo Centre
 
  1) Pudong International Airport→Expo Centre:take Subway Line2 (East Xujing direction or Songhong Road direction), get off at Longyang Road Station, or get off at Longyang Road Station by Magnetic levitation train (Longyang Road Station direction) , and then walk 1100 meters to Expo Centre, or then transfer Subway Line7 to Huamu Road Station, walk 100 meters to Expo Centre.
 
  2) Hongqiao Airport→Expo Centre: take Subway Line2 (Pudong International airport direction or Guanglan Road direction) to get off at Longyang Road Station, and then walk 1100 meters to Expo Centre, or transfer Subway Line7 to arrive at Huamu Road Station, walk 100 meters to Expo Centre.
 
  4. Railway Station→Expo Centre
 
  1) Shanghai Railway Station→Expo Centre: take Subway Line1 (Xinzhuang direction), get off at Renmin Square Station, transfer Subway Line2 (Pudong International airport direction or Guanglan Road direction), get off at Longyang Road Station, and then walk 1100 meters to Expo Centre, or transfer Subway Line7 to arrive at Huamu Road Station, walk 100 meters to Expo Centre.
 
  2) Shanghai South Railway Station→Expo Centre: take Subway Line1 (Fujin Road direction), get off at Shanghai Indoor Stadium Station, and transfer the outer circle of Line4, get off at Dong'an Road Station, then transfer Subway Line7 to arrive at Huamu Road Station, walk 100 meters to Expo Centre.
 
  3) Hongqiao railway station→Expo Centre: take Subway Line2 (Pudong International airport direction or Guanglan Road direction), get off at Longyang Road Station, and then walk 1100 meters to Expo Centre, or transfer Subway Line7 to arrive at Huamu Road Station, walk 100 meters to Expo Centre.
 
  ▲Taxi/Online car hailing→Expo Centre
 
  Visitors can get on and off by taxi and online car hailing at the entrance No.3 square of the exhibition hall.
 
  Driving→Expo Centre
 
  Please search through mobile map navigation software: Shanghai New International Expo Centre P1 stereo parking lot, select the best route in real time.
 
  Note:
 
  1. Road regulations in Shanghai: The license plates of cars for other places are prohibited from entering the inner ring area from 7:00 to 9:00 a.m. and 17:00 to 19:00 p.m. on weekdays, from 7:00 to 20:00 on weekdays, it is prohibited to enter elevated and tunnel roads, please follow the requirements of the local traffic management department.
 
  2. The above introduction to the public transportation and driving routes is just for reference, please check online or call Shanghai citizen service hotline: 12345 for any new circumstance before setting out.
 
  Parking lot of the venue
 
  1. P1 is a 3D parking lot, capacity is 2400 cars;
 
  2. P2 is a 3D parking lot, capacity is 700 cars;
 
  3. P4 capacity is 140 cars;
 
  4. P5 capacity is 460 cars;
 
  5. P6 capacity is 60 cars.
 
  Car parking lot RMB8Yuan/hour RMB64Yuan/day.
 
  Large vehicles with a "parking permit" can park at P3 and P7 parking lot according to the route guidance.
 
图片
 
Traffic Map of  CCMT2024
 
  Source:CMTBA
(来源:中国机床工具工业协会cmtba)


我要评论

文明上网,理性发言。(您还可以输入200个字符)

所有评论仅代表网友意见,与本站立场无关。

  • 凡本网注明“来源:机床商务网”的所有作品,均为浙江兴旺宝明通网络有限公司-机床商务网合法拥有版权或有权使用的作品。刊用本网站稿件,需经书面授权。未经本网授权不得转载、摘编或利用其它方式使用上述作品。已经本网授权使用作品的,应在授权范围内使用,并注明“来源:机床商务网”。违反上述声明者,本网将追究其相关法律责任。
  • 本网转载并注明自其它来源(非机床商务网)的作品,目的在于传递更多信息,并不代表本网赞同其观点或对其真实性负责,不承担此类作品侵权行为的直接责任及连带责任。其他媒体、网站或个人从本网转载时,必须保留本网注明的作品第一来源,并自负版权等法律责任。
  • 如涉及作品内容、版权等问题,请在作品发表之日起30日内与本网联系,并提供真实、有效的书面证明。我们将在核实后做出妥善处理。

  • 广告位招租
  • 易格斯(上海)拖链系统有限公司



图说机床

更多>>

旗下子站

玉环机床网泰州机床网滕州机床网宁波机床网沧州机床附件网工量刃具网加工中心网电加工机床网锻压机床网附件配件网车床网铣床网钻床网雕刻机网锯床网二手机床网
磨床网激光网机器人网立式加工中心卧式加工中心立式车床卧式车床龙门铣床摇臂钻床外圆磨床无心磨床数控折弯机冲床中走丝线切割拖链防护罩数控系统驱动器