曲柄型两两动作夹头
适用于方形或异形工件
It's a crank type chuck with independent motion of each two jaws.
it's applicable for clamping square bar or other special shape workpiece.
尺寸单位/Size unit: mm
规格 Spec 型号 Model | 楔心行程 Plunger stroke mm | 爪行程直径 Jaw stroke Dia. mm | 夹持直径 Max.clamping dia. mm | 最小夹持直径 Min.clamping dia. mm | 容许油压缸推力 Max D.B.pull KN |
|---|---|---|---|---|---|
| 4TT-08 | 17 | 13.6 | 210 | 24 | 16 |
| 4TT-10 | 20 | 16 | 254 | 50 | 21.6 |
| 4TT-12 | 20 | 16 | 304 | 50 | 21.6 |
| 4TT-15 | 25 | 19.6 | 381 | 60 | 27.2 |
规格 Spec 型号 Model | 夹持力 Max.clamping force KN | 回转数 Max RPM | 使用压力 Max Pressure Mpa | 重量 Weight kg | 适用油缸 Matching Cylinder |
|---|---|---|---|---|---|
| 4TT-08 | 54.3 | 3000 | 1.7 | 23.2 | SRD-120N |
| 4TT-10 | 79.4 | 2100 | 2.2 | 44.3 | SRD-125N |
| 4TT-12 | 79.4 | 1500 | 2.2 | 57.6 | SRD-125N |
| 4TT-15 | 105.3 | 1200 | 2.7 | 118.3 | SRD-125N |
型号 Model | A | B | C(H6) | D | E | G Max. | G Min. | G1 Max. | G1 Min. | H | H1 | J | K |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 4TT-08 | 210 | 91 | 170 | 133.4 | 5 | 32 | 15 | 2.5 | -14.5 | 29 | 20 | 61 | M14*2 |
| 4TT-10 | 254 | 110 | 220 | 171.4 | 5 | 36.5 | 16.5 | 10 | -10 | 36 | 23 | 90 | M16*2 |
| 4TT-12 | 304 | 110 | 220 | 171.4 | 5 | 36.5 | 16.5 | 10 | -10 | 36 | 23 | 90 | M16*2 |
| 4TT-15 | 381 | 135 | 300 | 235 | 6 | 44.5 | 19.5 | 5 | -20 | 45 | 28 | 125 | M20*2.5 |
型号 Model | K1 | L | L1 | M | N | P | Q Max. | Q Min. | R Max. | R Min. | S | T |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 4TT-08 | M34*1.5 | 4-M2 | 20 | 38 | 95 | 25 | 25.25 | 13.25 | 46.1 | 39.3 | 35 | 14 |
| 4TT-10 | M45*1. | 4-M16 | 25 | 43 | 110 | 30 | 32.25 | 12.75 | 59 | 51 | 40 | 16 |
| 4TT-12 | M45*1.5 | 4-M16 | 25 | 43 | 110 | 30 | 54.75 | 15.75 | 59 | 51 | 40 | 16 |
| 4TT-15 | M55*2 | 4-M20 | 30 | 51 | 130 | 30 | 66.5 | 12.5 | 78.9 | 69.1 | 50 | 21 |
