- HC(HY)-1000旋臂钻床技术参数
| 机柱表面到主轴中心之距离 (Distance between spindle centerandcolumn center) | Max(A) | 1000 |
最小Min(B) | 250 | |
| 主轴下端到机台底面之距离 ( Distance of spindle to base ) | Max(C) | 1120 |
最小Min(D) | 330 | |
| 机柱直径( Distance of spindle to base ) | E | 220 |
| 机台高度( Heinght of column ) | F | 2100 |
| 主轴上端到机台底面之距离 ( Max hcight from spindle hesd to bese ) | G | 2290 |
| 机台面积(Base floor space ) | HXI | 1500*700 |
| 主轴头左右移动距离 ( Spindle head longitudinal travel ) | K | 650 |
| 旋臂上下移动距离(Veticalamtravel) | L | 580 |
| 主轴上下行程( Spindle travel) | M | 210 |
| 主轴孔 ( Morse taper in spindle ) | MT | NO.4 |
| 机台工作面大小(Working area of base) | mm | 1050*700 |
| 主柚驱动马达( Motor for main spindle ) | KW | 1.5 (2HP) *4P |
| 旋臂升降马达( Motor for arm elevating) | KW | 0.375( 1/2HP) *6P |
| 夹紧动作马达(Motor for clamping device) | KW | — — |
| 主轴进给范围( Spindle fedsrange ) | mm/rev | 0.05-0.16 |
段Speed | 3 | |
| 主轴回转参数( Spindle speedrange ) | (60HZ)r.p.m | 88-1500 |
(50HZ)r.p.m | 72-1250 | |
段Speed | 6 | |
| 工作能量( Working capacity ) | 钻孔(铸铁) | 38 |
攻牙(S45C ) | 16 | |
| 净重( Net weight) | Kg | 1250 |
| 装箱总重( Gross weight ) | Kg | 1380 |
| 装箱尺寸(Measurement ) | mm | 1600* 750* 2200 |
