HWM5-6W1铁人泵-渣油泵管道布置图————网上找螺杆泵很纠结？选择太多？真假难辨？价格没底？——找杜工不纠结,专注螺杆泵15年,手机,,,, Product Introduce
The Double Twin Screw Pump is mainly composed of driving spindle,driven spindle and synchronous gear that is fixed on. Everyspindle has a rotating screw sleeve that the direction of rotationis contrary, the driving spindle conveys power to the drivenspindle by synchronous gear, so the rotating screw sleeve that wasfixed on the driving and driven spindle has no metallic contact.
When the pump is working, the rotating screw sleeve and pump bodyor bushing make a closed constant volume. The fluid mediumthat is sucked in from the inlet flange flows respectively to thenumber two side of the screw sleeve. It then comes intothe closed volume and is sent to the middle of the pump while thepump is working. The fluid is then transported to the outletside of the pump and through the outlet flange to the connectingpipe.
Product Features
Adopted synchronous gear: there is no metallic contact betweenrotating parts, there is an external bearing that is lubricatedseperay. The bearing or the lubrication are not influencedby the medium, so the range of medium that can be transported islarge. The pump is able to transport all kinds of fluidmedium including low viscosity, high viscosity, lubricity andnon-lubricity etc.
The pump body is two layer structure: it can heat and incubate themedium quickly and fully by using hot stream or heat-conductionoil.
The transported medium can only do a continual axial motion withinthe pump, delivery is calm and balanced. The pump is able totransport steadily and consistently to ensure that the performanceof medium and structure will not change.
Different methods of heat control can be selected for the bearingand gear in a low or high temperature environment to prolong thelife of the gear and bearing. It can use water to cool(reaching a maximum working temperature of 250 degrees) to avoidrigidity insufficiency, structure intricacy, and high cost relatedto the low life when using a long spindle.
Individual safe-valve structure: This gives the customer thefreedom to select whether to fix a problem according to the workdemand.
The special conduit ensures that the pump has high self-suctionability and lower NPSHr and can deliver the liquid with a certainproportional gas.
When the pump is working, there is no contact between the screwsleeve and the bushing this can allow dry running for a short time(≤2 minutes).
The costumer also has the option to change the speed of the pump toadjust the output pressure and keep flow steady.
The direction of the flow of the medium can also be changed if needbe.
Structure simplicity: this product has a fast and easy assembly anddisassembly.
Field of Application
Oil industryall kinds of lubricant oil, hydraulic oil, heavy oil,residue oil, crude oil and diesel oil .
Chemical industryall kinds of acid, alkali, salt, resin, glycerol,paraffin and other chemical raw material.
Paint industry :printing ink, all kinds of paint, pigment, primeretc..
Food industryalcohol, spirits, honey, syrup, toothpaste, milk,cream, soy, animal and vegetable oil etc.
Construction industry: all kinds of heavy oil, residue oil, coaltar oil etc.
Technology Parameter
1、delivery：10---800m3/h
2、working pressure：≤2.0MP
3、speed：950 rpm 1450rpm
4、working temperature：-20---250℃
5、viscosity：2---100000mm2/s
6、the high of suction：≤8m
Code specification
HW100—40SZ
direction of inlet and outlet
type of cooling
Type of cooling specification:
When the working temperature is less than 120 degreesselect naturalcooling(standard model)
When the working temperature is more than 120°and less than 140°,wesuggest using gill cooling to cool gear case
When the working temperature is more than 140°, we suggest usingcooling water to cool gear case and bearing housing.
Notice Of Selecting Pump Setting
Firstly to understand the practical working parameters, such as:flux, pressure, medium, working temperature and viscosity.
According to the viscosity of medium at working temperature, selectthe speed, usually when ≤300mm2/s, it is right to selectn=1450r/min, when≥300mm2/s, please take care to consider essentialcavitation remainder, avoid bringing the pump to a vibration.
From the pumps performance table, firstly to choose the setting tobest suit the needed delivery and pressure.
From the cavitation remainder table, find out the essentialcavitation remainder ＆#118alue according to the size, speed,viscosity.
After selection, the foundation will be designed depending on theoutline of pump a HWM5-6W1铁人泵-渣油泵管道布置图————螺杆泵就找杜工，专注螺杆泵15年，省心高效.—,
黄山铁人泵业有限公司是专业生产单螺杆泵、双螺杆泵和三螺杆泵的制造型企业，集螺杆泵产品研发、设计、制造于一体，产品广泛应用于石油、冶金、电力、化工、建材、机械、船舶、环保等行业，应用领域广，发展前景好，可替代其它泵进行使用，提高工作效率及稳定性。公司位于美丽的黄山脚下，地处徽州区境内，占地21亩，拥有注册资本800万元，总资产2000万元。
铁人实行股东会*下的总经理负责制。组织架构设总经理室、企管部(人力资源、行政后勤)、制造部、营销部、财务部。公司拥有一支行业经验丰富、文化素质高、技术、团结敬业的员工队伍,并且与浙江大学合作共同研发，具有行业成熟的技术研发能力，拥有多项自主知识产权，属国内行业内*技术水平。为广大用户提供项目咨询、产品研发、项目管理和产品应用等各个环节的服务。我们的产品是专门针对各种工况条件而开发设计、制造并使之适合实际应用的。在模块化设计、制造的基础上。我们可以为用户提供各种合适的泵型，并为产品进行升级、改进留下空间。所有这些工作的出发点是给节能、维护成本的降低，更好的运行安全性和保障性，更高的输送能力和效能提供保证，同时也给我们的用户带来更理想的性价比。
铁人应用*的三维建模设计软件和有限元分析软件精心设计，使产品*可靠、性能更优；在螺杆泵核心件螺杆的加工方面采用*的成型加工工艺和消应力处理工艺，使产品质量更好、更稳定。公司拥有国内*的、专业化的数控螺杆铣床、数控车床、数控铣床、渗氮炉、淬火炉、回火炉、线切割、磨床、锯床和加工中心等生产设备，以及成套、可模拟工况的产品实验、检测系统。
铁人实行科学化、规范化、标准化、精细化的管理和作业，严把质量关，确保产品。无论是一台整泵还是一个微小的零、部件，我们会为用户做到尽善尽美，精益求精。我们生产的螺杆泵流量大，流量稳定、粘度适应范围宽，密封性好、噪声低、使用寿命长。
铁人以“打造工业泵行业专家”为经营宗旨，秉承“至高品质、至诚服务”的经营理念，为客户提供产品和服务。我们可根据客户不同参数、环境和需求，设计定制产品，满足个性化产品定制需求，竭诚提供产品终身、快捷、周到和个性化的服务。
双螺杆泵、三螺杆泵、输油泵、燃油泵、船用泵、主机滑油泵
| 布局形式 | 卧式 | 产地 | 国产 |
|---|---|---|---|
| 工作温度 | 常温 | 类型 | 油泵 |
| 流量 | 1~2500m³/h | 售后保修期 | 18个月 |
| 销售区域 | 全国,华东,华南,华北,华中,东北,西南,西北,港澳台,海外 | 扬程 | 1~1000m |
铁人以“打造工业泵行业专家”为经营宗旨，秉承“至高品质、至诚服务”的经营理念，为客户提供优质产品和服务。我们可根据客户不同参数、环境和需求，设计定制产品，满足个性化产品定制需求，竭诚提供产品终身、快捷、周到和个性化的服务。
HWM5-6W1铁人泵-渣油泵管道布置图 产品信息
关键词：螺杆泵
