机床商务网
详细介绍
| 型号 | |
| Model ZXK-40 | |
| X 轴行程 | 600mm |
| X axis stroke | |
| Y 轴行程 | 360mm |
| Travel Y-axis | |
| z 轴行程 | 450mm |
| Z axis stroke | |
| 主轴鼻端到工作台距离 | 200-560mm |
| Distance from nose end of spindle to worktable | |
| 主轴中心到立柱轨面距离 | 388mm |
| Distance from the center of the spindle to the rail surface of the column | |
| 工作台至地面距离 | 760mm |
| Workbench to ground distance | |
| 工作台面积 | 700x360mm |
| Workbench area | |
| 工作台荷重 | 120kg |
| Maximum load of worktable | |
| T 型槽 | 14x3x80 |
| T-groove | |
| 主轴转速 | 6000r/Min |
| Maximum spindle speed | |
| 主轴孔锥度 | Bt40 |
| Mores | |
| 刀具重量 | 8KG |
| Heavy Tool Weight | |
| 刀具长度 | 200mm |
| Maximum tool length | |
| 刀具直径 | |
| Mmaximum tool diameter | |
| 主轴功率 | 7.5KW |
| Spindle power | |
| X 轴快速进给 | |
| X-axis fast feed | 15m/min |
| Y 轴快速进给 | 15m/min |
| Y-Axis Fast Feed | |
| Z 轴快速进给 | 15m/min |
| X Z Rapid traverse | |
| 切削进给 | 1 〜6000mm/min |
| Cutting feed | |
| 进给螺杆 X 轴 | |
| X-axis of feed screw | |
| 进给螺杆 Y 轴 | <)> 32x6mm |
| Y-axis of feed screw | |
| 进给螺杆 Z 轴 | ((> 32x6mm |
| Z-axis of feed screw | |
| 定位精度 | 0.012mm |
| Positioning accuracy | |
| 重复定位精度 | 0.008mm |
| Repeated positioning accuracy | |
| XYZ 导轨形式 | 硬导轨 Rigid guide |
| XYZ-guideway form | |
| 占地面积 | 176〇x 1700x2080mm |
| Area covered | |
| 机器重量 (约） | 2600KG |
| Machine weight | |
| 总电力容量 | 15KW |
| Total power capacity | |
| 气源压力 | 6-8MPa |
| Gas source pressure |
机床商务网