机床商务网
详细介绍
BUEHLER
VACUUM IMPREGNATION EQUIPMENT I
BUEHLER. VACUUM IMPREGNATION
EQUIPMENT I evacuates entrapped air from
specimens. Without the presence of air, the mounting
compound fills the specimen pores and eliminates
gaps between the specimen and the compound.
As a result, edge retention is enhanced and
friable samples are supported during grinding and
polishing.
The rugged vacuum pump supplies sufficient
vacuum to quickly evacuate entrapped air from any
porous specimen. The patented, high strength
plastic chamber maintains vacuum throughout the
impregnation period by means of a simple “O” ring
seal. Several specimens may be impregnated at
one time using a unique rotary table, within the
vacuum chamber
The ingenious pouring mechanism enables the premixed
mounting compound to be placed inside the
chamber and then poured into molds one at a time.
A variety of epoxy and polyester castable （cold）
mounting compounds can be used. Since the
specimens are encapsulated under vacuum, the
possibility of air entering is compley eliminated
VACUUM IMPREGNATION EQUIPMENT II is
Easy To Use:
n Place the specimen molds on the rotating turn
table within the vacuum chamber
n After the mounting compound is mixed, slide
the mixing cup into the cup holder
n Place the vacuum chamber cover onto the base
n Pump down to the recommended vacuum of 26″
Hg. （559 Torr）
n Pour the mounting compound into the mold and
then use the control switch to advance the rotary
table to the next mold
n Once cast, hold for one （1） minute, then vent to
atmospheric pressure; repeat the cycle several
times
n Open the chamber, remove the mounts and
allow to cure normally
The unique rotatable vacuum table and tilting dispensing
mechanism allows the operator to pour epoxies
under vacuum to better impregnate specimens.
Replaceable Vacuum Table Liners protect the rotating
table and eliminate messy cleanup.
Specifications
No. 20-1382-160 VACUUM IMPREGNATION
EQUIPMENT I, with high strength plastic vacuum
chamber, built-in synchronous motor and rotating turn
table, pouring mechanism, vacuum gauge, hoses, filtering
flask, glass tubing, rubber stopper, 100 graduated
paper cups, 12 SAMPL-KUPS. , 100 vacuum table liners,
Drierite dehydrating agent and vacuum pump. For 115V/
60Hz/1 phase.Operating instructions included.
No. 20-1382-250 VACUUM IMPREGNATION
EQUIPMENT I, same as 20-1382-160, but for
220V/50Hz/1 phase operation.
No. 20-1383-115 VACUUM IMPREGNATION
EQUIPMENT I, same as 20-1382-160, but without
vacuum pump. For 115V/50Hz/1 phase operation.
No. 20-1383-220 VACUUM IMPREGNATION
EQUIPMENT I, same as 20-1382-250, but without
vacuum pump. For 220V/50Hz/1 phase operation.
No. 20-1384-115 Vacuum Assembly, vacuum
chamber with built-in synchronous motor, rotary table
and vacuum gauge. Does not include vacuum pump
filtering flask, hoses, tubing and other accessories.
For 115V/60Hz/1 phase operation.
No. 20-1384-220 Vacuum Assembly, same as
20-1384-115, but for 220V/50Hz/1 phase operation.
No. 20-2850-160 Vacuum Pump, for 115V/60Hz/1
phase operation.
No. 20-2850-250 Vacuum Pump, for 220V/50Hz/1
phase operation.
Consumables
Castable （Cold） Mounting Compounds
Product Quantity Part No. Properties
EPOXICURE.
（formerly Epoxide）
Resin 1qt. （0.95l） 20-8130-032 Multi-purpose
Hardener . 1/2 pt. （0.24l） 20-8132-008 epoxy
EPO-THIN.
Resin 1 qt. （0.95l） 20-8140-032 Low viscosity
Hardener 1 pt. （0.47l） 20-8142-016 epoxy
EPO-KWICK.
Kit 1 qt. （0.95l） 20-8128 Fast cure
Resin 1 gal. （3.8l） 20-8136-128 epoxy
Hardener 1 qt. （0.95l） 20-8138-032
EPO-COLOR. Dye
Resin 1 qt. （0.95l） 20-8143-032 enhanced
Hardener . 1/2pt. （0.24l） 20-8144-008 epoxy
Castable （Cold） Mounting Supplies
Product Quantity Part Number
SAMPL-KUPS. 12 20-8180
Graduated Paper Cups 100 20-8177-100
Vacuum Table Liners 100 20-2845
Drierite Dehydrating Agent 1 lb. （0.45kg） 20-2835
Stirring Sticks 1000 20-8175
Release Agent 1 pt. （0.47l） 20-8185-016
Dimensions:
20-1384 Vacuum Assembly:
13″W x 11″D x 16″H （330mm x 280mm x 400mm）
20-2850 Vacuum Pump:
12″W x 6″D x 8″H （300mm x 150mm x 200mm）
Shipping Weight:
No. 20-1382: 50 lbs. （23kg）
No. 20-1383: 23 lbs. （10kg）
No. 20-1384: 11 lbs. （5kg）
No. 20-2850: 28 lbs. （13kg）
For a complete listing of Buehler consumable supplies for use with
the VACUUM IMPREGNATION EQUIPMENT I, please refer to
Buehler’s Consumables Buyer’s Guide.
Buehler continuously makes product improvements; therefore,
technical specifications are subject to change without notice.
机床商务网